UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

þ		ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

o		TRANSITION REPORT PURSUANT TO SECTION 13 OR 15 (d) OF THE SECURITIES EXCHANGE ACT OF 1934

Commission file number 1-5978

SIFCO Industries, Inc.

(Exact name of registrant as specified in its charter)

Ohio		34-0553950
(State or other jurisdiction of incorporation or organization)		(I.R.S. Employer Identification No.)
970 East 64th Street, Cleveland Ohio		44103
(Address of principal executive offices)		(Zip Code)

(216) 881-8600

Securities Registered Pursuant to Section 12(b) of the Act:

Common Shares, $1 Par Value		NYSE AMEX
(Title of each class)		(Name of each exchange on which registered)

Securities registered pursuant to Section 12(g) of the Securities Exchange Act: None.

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Exchange Act.
Yes o       No þ

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Securities Exchange Act. Yes o       No þ

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ       No o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes o       No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company (as defined in Rule 12b-2 of the Securities Exchange Act).

large accelerated filer o		accelerated filer o		non-accelerated filer o		smaller reporting company þ
				(Do not check if a smaller reporting company)

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

Yes o       No þ

The aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold, as of the last business day of the registrant’s most recently completed second fiscal quarter is $18,995,824.

The number of the Registrant’s Common Shares outstanding at October 31, 2009 was 5,299,966.

Documents incorporated by reference: Portions of the definitive Proxy Statement for the Annual Meeting of Shareholders to be held on January 26, 2010 (Part III).

 

 

PART I

Item 1. Business

A. The Company

SIFCO Industries, Inc. (“SIFCO” or “Company”), an Ohio corporation, was incorporated in 1916. The executive offices of the Company are located at 970 East 64th Street, Cleveland, Ohio 44103, and its telephone number is (216) 881-8600.

The Company is engaged in the production and sale of a variety of metalworking processes, services and products produced primarily to the specific design requirements of its customers. The processes and services include forging, heat-treating, coating, welding, machining, and selective electrochemical finishing. The products include forged components, machined forged parts and other machined metal components, remanufactured component parts for aerospace turbine engines, and selective electrochemical finishing solutions and equipment. The Company’s operations are conducted in three business segments: (i) Aerospace Component Manufacturing Group, (ii) Turbine Component Services and Repair Group and (iii) Applied Surface Concepts Group.

B. Principal Products and Services

1. Aerospace Component Manufacturing Group

The Aerospace Component Manufacturing Group (“ACM Group”) has a single operation in Cleveland, Ohio. This segment of the Company’s business consists principally of the manufacture of forged components for aerospace applications. As a part of the ACM Group’s manufacturing process, the business performs forging, heat-treating and precision component machining.

Operations

The Company’s ACM Group is a manufacturer of forged components ranging in size from 2 to 500 pounds (depending on configuration and alloy), primarily in various steel and titanium alloys, utilizing a variety of processes for applications principally in the aerospace industry. The ACM Group’s forged products include: original equipment manufacturers (“OEM”) and aftermarket components for aircraft and land-based turbine engines; structural airframe components; aircraft landing gear components; wheels and brakes; critical rotating components for helicopters; and commercial/industrial products. The ACM Group also provides heat-treatment, surface-treatment, non-destructive testing and select machining of forged components.

The ACM Group generally has multiple sources for its raw materials, which consist primarily of high quality metals essential to this business. Suppliers of such materials are located throughout North and South America and Europe. The ACM Group generally does not depend on a single source for the supply of its materials. Due to the scarcity of certain raw materials, some material is provided by a limited number of suppliers; however, the ACM Group believes that its sources are adequate for its business. The business is ISO 9001:2000 registered and AS 9100:2001 certified. In addition, the ACM Group’s chemical etching/milling, non-destructive testing, and heat-treating facilities are NADCAP (National Aerospace and Defense Contractors Accreditation Program) accredited.

Industry

The performance of the domestic and international air transport industry directly and significantly impacts the performance of the ACM Group. The air transport industry’s long-term outlook is for continued, steady growth. Such outlook suggests the need for additional aircraft and, therefore, growth in the requirement for airframe and turbine engine components. Although the air transport industry has recently benefited from several favorable trends, including: (i) projected growth in air traffic, (ii) the major replacement and refurbishment cycles driven by the desire for more fuel efficient aircraft and fleet commonality and (iii) the increased use of wide-body aircraft, this is changing. The current global economic downturn has created significant reductions in available capital and liquidity from banks and other providers of credit. Therefore, this downturn has adversely affected the ability of the ACM Group’s customers to fulfill their purchase commitments on a timely basis and, consequently, the level of the ACM Group’s business. Certain ACM Group customers have recently extended/delayed their required delivery schedules, in particular those customers in the commercial sector of the market. It is difficult to determine at this time what the long-term impact of these factors may be on the demand for products provided by the ACM Group. However, a continued deterioration in the global economy could result in further reduced demand for the products and services that it provides. The ACM Group also supplies new and spare components for military aircraft. As a result of continued military initiatives, there has been increased demand for both new and spare components for military customers. The ACM Group’s current outlook for the air transport industry is cautiously optimistic while the military segment remains stable. Further, the ACM Group does believe that it is poised to take advantage of improvement in order demand from the commercial airframe and engine manufacturers if and when it may occur.

Competition

While there has been some consolidation in the forging industry, the ACM Group believes there is limited opportunity to increase prices, other than for the pass-through of raw material steel and titanium alloys price increases. The ACM Group believes, however, that its demonstrated aerospace expertise along with focus on quality, customer service, SMART (Streamlined Manufacturing Activities to Reduce Time/Cost) initiatives, as well as offering a broad range of capabilities provide it with an advantage in the primary markets it serves. The ACM Group competes with both U.S. and non-U.S. suppliers of forgings, some of which are significantly larger than the ACM Group. As customers establish new facilities throughout the world, the ACM Group will continue to encounter non-U.S. competition. The ACM Group believes it can expand its markets by (i) broadening its product lines through investment in equipment that expands its manufacturing capabilities and (ii) developing new customers in markets whose participants require similar technical competence and service (as the aerospace industry) and are willing to pay a premium for quality.

Customers

During fiscal 2009, the ACM Group had two customers, various business units of Rolls-Royce Corporation and United Technologies Corporation, which accounted for 18% and 13%, respectively, of the ACM Group’s net sales. The net sales to these two customers, and the direct subcontractors to these two customers, accounted for 57% of the ACM Group’s net sales in 2009. The ACM Group believes that the loss of sales to such customers would result in a materially adverse impact on the business and income of the ACM Group. However, the ACM Group has maintained a business relationship with these customers for well over ten years and is currently conducting business with some of them under multi-year agreements. Although there is no assurance that this will continue, historically as one or more major customers have reduced their purchases, the ACM Group has generally been successful in replacing such reduced purchases, thereby avoiding a material adverse impact on the ACM Group. The ACM Group attempts to rely on its ability to adapt its services and operations to changing requirements of the market in general and its customers in particular. No material part of the ACM Group’s business is seasonal.

Backlog of Orders

The ACM Group’s backlog as of September 30, 2009 decreased to $70.6 million, of which $52.1 million is scheduled for delivery during fiscal 2010, compared with $76.6 million as of September 30, 2008, of which $63.8 million was scheduled for delivery during fiscal 2009. All orders are subject to modification or cancellation by the customer with limited charges. It is important to note that the delivery lead times for certain raw materials (e.g. aerospace grades of steel and titanium alloys) have continued to shorten and the ACM Group believes that such lead time reduction may have resulted in a fundamental shift in the ordering pattern of its customers. The ACM Group believes that a likely consequence of such a shift is that customers are not placing orders as far in advance as they previously did, which results in a reduction, relative to comparable prior periods, in the ACM Group’s backlog. Accordingly, such backlog reduction is not necessarily completely indicative of actual sales expected for any succeeding period. During fiscal 2009, the ACM Group experienced a decrease in orders for products that principally support commercial aircraft.

2. Turbine Component Services and Repair Group

The Company’s Turbine Component Services and Repair Group (“Repair Group”) has a single operation in Minneapolis, Minnesota. This segment of the Company’s business consists principally of the repair and remanufacture of small aerospace turbine engine components. As a part of the repair and remanufacture process, the business performs precision component machining and applies high temperature-resistant coatings to turbine engine components.

Operations

The Repair Group requires the procurement of licenses/authority, which certifies that the Group has obtained approval to perform certain proprietary repair processes. Such approvals are generally specific to an engine and its components, a repair process, and a repair facility/location. Without possession of such approvals, a company would be precluded from competing in the aerospace turbine engine component repair business. Approvals are issued by either the original equipment manufacturers (“OEM”) of aerospace turbine engines or the Federal Aviation Administration (“FAA”).

In general, the Company considers aerospace turbine engines that (i) possess a thrust of less than 17,500 pounds and/or (ii) are used to power aircraft that carry fewer than 100 passengers to be small aerospace turbine engines. Historically, the Repair Group has elected to procure approvals primarily from the OEMs and currently maintains proprietary repair process approvals issued by certain of the primary small engine OEMs (e.g. Pratt & Whitney, Rolls-Royce, Turbomeca, and Hamilton Sundstrand). In exchange for being granted an OEM approval, the Repair Group is obligated, in most cases, to

pay royalties to the OEM for each type of component repair that it performs utilizing the OEM-approved proprietary repair process. The Repair Group continues to be successful in procuring FAA repair process approvals. There is generally no royalty payment obligation associated with the use of a repair process approved by the FAA. To procure an OEM or FAA approval, the Repair Group is required to demonstrate its technical competence in the process of repairing such turbine engine components.

The development of remanufacturing and repair processes is an ordinary part of the Repair Group’s business. The Repair Group continues to invest time and money on research and development activities. The Company’s research and development activities in repair processes and high temperature-resistant coatings applied to super-alloy materials have applications in the small aerospace turbine engine markets. Operating costs related to such activities are expensed during the period in which they are incurred. The Group’s research and development expense was $0.4 million and $0.5 million in fiscal 2009 and 2008, respectively.

The Repair Group generally has multiple sources for its raw materials, which consist primarily of investment castings and industrial coating materials essential to this business. Certain items are procured directly from the OEM, or from OEM-certified suppliers, to satisfy repair process requirements. Suppliers of such materials are located throughout North America and Europe. Although certain raw materials may be provided by a limited number of suppliers, the Repair Group generally does not depend on a single source for the supply of its materials and management believes that its sources are adequate for its business.

Industry

The performance of the air transport industry directly and significantly impacts the performance of the Repair Group. The air transport industry’s long-term outlook is for continued, steady growth. Such outlook suggests the need for additional aircraft and, therefore, growth in the requirement for aerospace turbine engines and related engine repairs. Although the air transport industry has recently benefited from several favorable trends, including: (i) projected growth in air traffic, (ii) the beginning of major replacement and refurbishment cycles driven by the desire for more fuel efficient aircraft and fleet commonality, and (iii) the increased use of regional aircraft, this is changing. The current global economic downturn has created significant reductions in available capital and liquidity from banks and other providers of credit. It is difficult to determine at this time what the long-term impact of these factors may be on air travel and the demand for products and services provided by the Repair Group. However, a continued deterioration in the global economy could result in further reduced demand for the products and services that the Repair Group provides. Management’s current outlook for the air transport industry continues to remain cautiously optimistic in the near term.

Competition

In recent years, while the absolute number of competitors has decreased as a result of industry consolidation and vertical integration, competition in the turbine engine component repair business has nevertheless increased, principally due to the increased direct involvement of the aerospace turbine engine manufacturers in the turbine engine overhaul and component repair businesses. With the presence of the OEMs in the market, there has been a general reluctance on the part of the OEMs to issue, to independent component repair companies, approvals for the repair of their newer model engines and related components. The Company believes that the Repair Group will, more likely than not, become more dependent in the future on (i) its ability to successfully procure and market FAA approved licenses and related repair processes and/or (ii) close collaboration with engine manufacturers.

Customers

The identity and ranking of the Repair Group’s principal customers can vary from year to year. The Repair Group attempts to rely on its ability to adapt its services and operations to changing requirements of the market in general and its customers in particular, rather than relying on high volume production of a particular item or group of items for a particular customer or customers. During fiscal 2009, the Repair Group had three customers, consisting of various business units of United Technologies Corporation, Safran Group and Rolls-Royce Corporation, which accounted for 37%, 16% and 14%, respectively, of the Repair Group’s net sales. Although there is no assurance that this will continue, historically as one or more major customers have reduced their purchases, the business has generally been successful in replacing such reduced purchases, thereby avoiding a material adverse impact on the business. No material part of the Repair Group’s business is seasonal.

Backlog of Orders

The Repair Group’s backlog from continuing operations as of September 30, 2009 decreased to $3.4 million, of which $2.3 million is scheduled for delivery during fiscal 2010 and $1.1 million is on hold, compared with $4.5 million as of September

30, 2008, of which $2.3 million was scheduled for delivery during fiscal 2009 and $2.2 million was on hold. All orders are subject to modification or cancellation by the customer with limited charges. The Repair Group believes that the backlog may not necessarily be indicative of actual sales for any succeeding period.

3. Applied Surface Concepts Group

The Company’s Applied Surface Concepts Group (“ASC Group”) provides surface enhancement technologies principally related to selective electrochemical finishing and anodizing. Principal product offerings include (i) the sale of metal plating solutions and equipment required for selective electrochemical finishing and (ii) providing selective electrochemical finishing contract services.

Operations

Selective electrochemical finishing of a component is done without the use of an immersion tank. A wide variety of pure metals and alloys, principally determined by the customer’s design requirements, can be used for applications including corrosion protection, wear resistance, anti-galling, increased lubricity, increased hardness, increased electrical conductivity, and re-sizing. SIFCO Process^® metal solutions include: cadmium, cobalt, copper, nickel, tin and zinc. In addition, precious metal solutions such as gold, iridium, palladium, platinum, rhodium, and silver are also provided to customers. The ASC Group has also developed a number of alloy-plating solutions such as nickel-cobalt solutions that can be used as a more environmentally friendly replacement for a chrome plating solution, or a zinc-nickel solution that can be used as a more environmentally friendly replacement for a cadmium plating solution. In fiscal 2009, the ASC Group completed development of new selective plating technologies: (i) plating on titanium and (ii) plating with a cobalt chromium carbide metal matrix composite.

The ASC Group can either (i) supply selective electrochemical finishing chemicals and equipment to customers desiring to perform selective electrochemical finishing in-house or (ii) provide manual or semi-automated contract selective electrochemical finishing services at either the customer’s site or at one of the Group’s facilities. The Group operates four U.S. facilities in geographic areas strategically located in proximity to its major customers (Cleveland, Ohio / Hartford, Connecticut / Norfolk, Virginia / Houston, Texas) and three in Europe (Birmingham, England / Paris, France / Rattvik, Sweden). The scope of selective electrochemical finishing work includes part salvage and repair, part refurbishment, and new part enhancement. Selective electrochemical finishing solutions are produced in the Cleveland, Ohio and Birmingham, England facilities.

The ASC Group generally has multiple sources for its raw materials, which consist primarily of industrial chemicals and metal salts and, therefore, does not depend on a single source for the supply of key raw materials. Management believes that its sources of raw materials are adequate to support its business.

The ASC Group sells its products and services under recognized industry brand names including: SIFCO Process^®, Dalic^®, USDL^® and Selectron^®, all of which are specified in military and industrial specifications. The ASC Group’s manufacturing operations have ISO 9001:2001 and AS 9100A certifications. In addition, two of its facilities are NADCAP (National Aerospace and Defense Contractors Accreditation Program) certified. Two of the service centers are FAA approved repair shops. Other ASC Group approvals include ABS (American Bureau of Ships), ARR (American Railroad Registry), JRS (Japan Registry of Shipping), and KRS (Korean Registry of Shipping).

Industry

Selective electrochemical finishing occupies a niche within the broader metal finishing industry. The ASC Group’s selective electrochemical finishing process is used to provide functional, engineered finishes rather than decorative finishes, and it serves many markets including aerospace, medical, electric power generation, and oil and gas. In its planning and decision making processes, management of the ASC Group monitors and evaluates precious metal prices, global manufacturing activity, internal labor capacity, technological developments in surface enhancement, and the exploration and production activities relative to oil and gas products. The diversity of industries served helps to mitigate the impact of economic cycles on the ASC Group.

Competition

Although the Company believes that the ASC Group is the world’s largest selective electrochemical finishing company, there are several companies globally that manufacture and sell selective electrochemical finishing solutions and equipment and/or provide contract selective electrochemical finishing services. The ASC Group seeks to differentiate itself through its

technical support and research and development capabilities. The ASC Group also competes with other surface enhancement technologies such as welding and metal spray.

Customers

The ASC Group has a customer base of over 1,000 customers. However, approximately 10 customers, who operate in a variety of industries, accounted for approximately 31% the Group’s fiscal 2009 net sales. No material part of the ASC Group’s business is seasonal.

Backlog of Orders

Due to the nature of its business (i.e. shorter lead times for its products and services) the ASC Group had no material backlog at September 30, 2009 and 2008.

4. General

For financial information concerning the Company’s reportable segments see Management’s Discussion and Analysis of Financial Condition and Results of Operations included in Item 7 and Note 11 to consolidated financial statements included in Item 8.

C. Environmental Regulations

In common with other companies engaged in similar businesses, the Company is required to comply with various laws and regulations relating to the protection of the environment. The costs of such compliance have not had, and are not presently expected to have, a material effect on the capital expenditures, earnings or competitive position of the Company and its subsidiaries under existing regulations and interpretations.

D. Employees

The number of the Company’s employees decreased from approximately 360 at the beginning of fiscal year 2009 to approximately 310 employees at the end of fiscal 2009. The decrease was principally the result of reductions in employment levels in all of the Company’s businesses due to the general economic downturn. The Company is party to a collective bargaining agreement with certain employees located at its ACM Group’s Cleveland, Ohio facility. The ACM Group’s union contract expires in May 2010 (effective since May 2005). The Repair Group’s union contract expired in July 2009 and was extended for 60 days until September 2009. As of September 30, 2009 the Repair Group is operating without a collective bargaining agreement. Management considers its relations with the Company’s employees to be good.

E. Non-U.S. Operations

The Company’s products and services are distributed and performed in U.S. as well as non-U.S. markets. The Company commenced its operations in Ireland in 1981 and ceased such operations in 2007. The Company commenced its operations in the United Kingdom and France as a result of an acquisition of a business in 1992. The Company commenced its operations in Sweden as a result of an acquisition of a business in 2006. Wholly-owned subsidiaries operate the Company’s service and distribution facilities in the United Kingdom, France and Sweden.

Financial information about the Company’s U.S. and non-U.S. operations is set forth in Note 11 to the consolidated financial statements included in Item 8.

As of September 30, 2009, a portion of the Company’s cash and cash equivalents are in the possession of its non-U.S. subsidiaries and relate to undistributed earnings of these non-U.S. subsidiaries. Distributions from the Company’s non-U.S. subsidiaries to the Company may be subject to statutory restrictions, adverse tax consequences or other limitations.

Item 2. Properties

The Company’s property, plant and equipment include the facilities described below and a substantial quantity of machinery and equipment, most of which consists of industry specific machinery and equipment using special jigs, tools and fixtures and in many instances having automatic control features and special adaptations. In general, the Company’s property, plant and equipment are in good operating condition, are well maintained and substantially all of its facilities are in regular use. The Company considers its investment in property, plant and equipment as of September 30, 2009 suitable

and adequate given the current product offerings for the respective business segments’ operations in the current business environment. The square footage numbers set forth in the following paragraphs are approximations:

	•		The Turbine Component Services and Repair Group operates a single, owned facility in Minneapolis, Minnesota with a total of 59,000 square feet and that is involved in the repair and remanufacture of small aerospace turbine engine components.
	•		The Aerospace Component Manufacturing Group operates in a single, owned 240,000 square foot facility located in Cleveland, Ohio. This facility is also the site of the Company’s corporate headquarters.
	•		The Applied Surface Concepts Group is headquartered in an owned 34,000 square foot facility in Cleveland, Ohio. The Group leases space aggregating 52,000 square feet for sales offices and/or for its contract selective electrochemical finishing services in Norfolk, Virginia; Hartford, Connecticut; Houston, Texas; Paris, France; and Birmingham, England. The Group also operates in an owned 3,000 square foot facility in Rattvik, Sweden.
	•		The Company owns a building located in Cork, Ireland (59,000 square feet) that (i) is subject to a long-term lease arrangement with the acquirer of the Repair Group’s industrial turbine engine component repair business that was sold in fiscal 2007, and (ii) is being marketed for sale as of September 30, 2009.

Item 3. Legal Proceedings

In the normal course of business, the Company may be involved in ordinary, routine legal actions. The Company cannot reasonably estimate future costs, if any, related to these matters and does not believe any such matters are material to its financial condition or results of operations. The Company maintains various liability insurance coverages to protect its assets from losses arising out of or involving activities associated with ongoing and normal business operations; however, it is possible that the Company’s future operating results could be affected by future cost of litigation.

Item 4. Submission of Matters to a Vote of Security Holders

No matters were submitted to a vote of security holders during the fourth quarter of the Company’s 2009 fiscal year.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Prior to October 1, 2008, the Company’s Common Shares were traded on the American Stock Exchange (AMEX) under the symbol “SIF”. NYSE Euronext acquired the AMEX on October 1, 2008. Post merger, the AMEX equities business was re-branded to NYSE AMEX Equities (NYSE AMEX). The Company’s Common Shares are now traded on the NYSE AMEX under the symbol “SIF”. The following table sets forth, for the periods indicated, the high and low closing sales price for the Company’s Common Shares.

		Years Ended September 30,
		2009								2008
		High				Low				High			Low
First Quarter		$	7.85			$	4.10			$	23.20			$	14.60
Second Quarter			7.60				4.92				16.78				9.80
Third Quarter			11.37				5.94				15.40				10.08
Fourth Quarter			14.76				9.34				10.95				7.60

Performance Graph

Set forth below is a graph comparing the returns to shareholders of the Company’s Common Shares to the returns to shareholders of the S&P Composite — 500 Stock Index and the S&P Aerospace/Defense Index. The graph assumes (i) that the value of the investment in the Company’s Common Shares, the S&P Composite — 500 Stock Index and the S&P Aerospace/Defense Index was $100 on September 30, 2004 and (ii) the reinvestment of dividends.

Comparison of Five-Year Return Performance of
SIFCO Industries, Inc., the S&P 500 Index
and the S&P Aerospace/Defense Index

Dividends and Shares Outstanding

The Company declared a special cash dividend of $0.10 per Common Share in fiscal 2009 but does not necessarily anticipate paying further dividends in the foreseeable future. The Company currently intends to retain all of its earnings for the operation and growth of its businesses. The Company’s ability to declare or pay cash dividends is limited by its credit agreement covenants. At October 31, 2009, there were approximately 689 shareholders of record of the Company’s Common Shares, as reported by Computershare, Inc., the Company’s Transfer Agent and Registrar, which maintains its U.S. corporate offices at 250 Royall Street, Canton, MA 02021.

Item 6. Selected Financial Data

The following table sets forth selected consolidated financial data of the Company. The data presented below should be read in conjunction with the audited consolidated financial statements and notes to consolidated financial statements included in Item 8.

		Years Ended September 30,
		2009				2008				2007				2006				2005
		(Amounts in thousands, except per share data)
Statement of Operations Data
Net sales		$	93,888			$	101,391			$	87,255			$	68,606			$	52,863
Income (loss) from continuing operations before income tax provision			12,327				8,820				10,255				(35	)			(2,424	)
Income tax provision			4,480				3,277				1,483				14				541
Income (loss) from continuing operations			7,847				5,543				8,772				(49	)			(2,965	)
Income (loss) from continuing operations per share (basic)			1.48				1.05				1.67				(0.01	)			(0.57	)
Income (loss) from continuing operations per share (diluted)			1.47				1.04				1.66				(0.01	)			(0.57	)
Income (loss) from discontinued operations, net of tax			188				287				(2,044	)			1,009				2,769
Net income (loss)			8,035				5,830				6,728				960				(196	)
Net income (loss) per share (basic)			1.52				1.10				1.28				0.18				(0.04	)
Net income (loss) per share (diluted)			1.51				1.09				1.27				0.18				(0.04	)
Cash dividends per share			0.10				—				—				—				—
Shares Outstanding at Year End			5,298				5,295				5,281				5,222				5,222
Balance Sheet Data
Working capital		$	35,540			$	34,315			$	32,350			$	15,011			$	9,619
Property, plant and equipment, net			16,940				10,253				10,570				14,059				18,744
Total assets			65,770				60,149				60,889				48,775				49,523
Long-term debt, net of current maturities			154				269				2,986				427				10
Other long-term liabilities			6,207				2,450				1,958				5,838				8,645
Total shareholders’ equity			45,245				40,679				36,778				25,183				22,398
Shareholders’ equity per share			8.54				7.68				6.96				4.82				4.29
Financial Ratios
Return on beginning shareholders’ equity			19.8	%			15.9	%			26.7	%			4.3	%			(0.8	)%
Long-term debt to equity percent			0.3	%			0.7	%			8.1	%			1.7	%			—
Current ratio			3.9				3.6				3.1				1.9				1.5

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

This Form 10-K, including Management’s Discussion and Analysis of Financial Condition and Results of Operations, may contain various forward-looking statements and includes assumptions concerning the Company’s operations, future results and prospects. These forward-looking statements are based on current expectations and are subject to risk and uncertainties. In connection with the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995, the Company provides this cautionary statement identifying important economic, political and technological factors, among others, the absence or effect of which could cause the actual results or events to differ materially from those set forth in or implied by the forward-looking statements and related assumptions. Such factors include the following: (1) the impact on business conditions, and on the demand for product in the aerospace industry in particular, of the global economic downturn, including the reduction in available capital and liquidity from banks and other providers of credit; (2) future business environment, including capital and consumer spending; (3) competitive factors, including the ability to replace business which may be lost; (4) successful development of turbine component repair processes and/or procurement of new repair process licenses from turbine engine manufacturers and/or the Federal Aviation Administration; (5) metals and commodities price increases and the Company’s ability to recover such price increases; (6) successful development and market introduction of new products and services (7) regressive pricing pressures on the Company’s products and services, with productivity improvements as the primary means to maintain margins; (8) continued reliance on consumer acceptance of regional and business aircraft powered by more fuel efficient turboprop engines; (9) continued reliance on several major customers for revenues; (10) the Company’s ability to continue to have access to its revolving credit facility; (11) the impact on future contributions to the Company’s defined benefit pension plans due to changes in actuarial assumptions and

the market value of plan assets; and (12) stable governments, business conditions, laws, regulations and taxes in economies where business is conducted.

The Company and its subsidiaries engage in the production and sale of a variety of metalworking processes, services and products produced primarily to the specific design requirements of its customers. The processes and services include forging, heat-treating, coating, welding, machining, and selective electrochemical finishing. The products include forged components, machined forged parts and other machined metal components, remanufactured component parts for turbine engines, and selective electrochemical finishing solutions and equipment. The Company’s operations are conducted in three business segments: (1) Aerospace Component Manufacturing Group, (2) Turbine Component Services and Repair Group, and (3) Applied Surface Concepts Group. The Company endeavors to plan and evaluate its businesses’ operations while taking into consideration certain factors including the following — (i) the projected build rate for commercial, business and military aircraft as well as the engines that power such aircraft, (ii) the projected maintenance, repair and overhaul schedules for commercial, business and military aircraft as well as the engines that power such aircraft, and (iii) anticipated exploration and production activities relative to oil and gas products, etc.

A. Results of Operations

1. Fiscal Year 2009 Compared with Fiscal Year 2008

Net sales in fiscal 2009 decreased 7.4% to $93.9 million, compared with $101.4 million in fiscal 2008.

Income from continuing operations in fiscal 2009 was $7.8 million, compared with $5.5 million in fiscal 2008. Included in the $7.8 million of income from continuing operations in fiscal 2009 was LIFO income of $1.6 million. Included in the $5.5 million of income from continuing operations in fiscal 2008 was (i) $0.5 million of expense related to an amicable business settlement of a product dispute that originated in fiscal 2007, (ii) $0.8 million of expense related to the impairment of a long-lived asset and (iii) LIFO expense of $1.7 million. Income from discontinued operations, net of tax, was $0.2 million in fiscal 2009, compared with $0.3 million in fiscal 2008. Net income in fiscal 2009 was $8.0 million, compared with $5.8 million in fiscal 2008.

Aerospace Component Manufacturing Group (“ACM Group”)

Net sales in fiscal 2009 decreased 4.6% to $68.6 million, compared with $72.0 million in fiscal 2008. For purposes of the following discussion, the ACM Group considers aircraft that can accommodate less than 100 passengers to be small aircraft and those that can accommodate 100 or more passengers to be large aircraft. Net sales of airframe components for small aircraft increased $0.3 million to $38.5 million in fiscal 2009, compared with $38.2 million in fiscal 2008. Net sales of turbine engine components for small aircraft, which consist primarily of business and regional jets, as well as military transport and surveillance aircraft, increased $1.1 million to $21.0 million in fiscal 2009, compared with $19.9 million in fiscal 2008. Net sales of airframe components for large aircraft decreased $3.0 million to $4.6 million in fiscal 2009, compared with $7.6 million in fiscal 2008. Net sales of turbine engine components for large aircraft decreased $0.8 million to $2.2 million in fiscal 2009, compared with $3.0 million in fiscal 2008. Commercial product sales and other revenues were $2.3 million and $3.3 million in fiscal 2009 and 2008, respectively. The decline in net sales of airframe and turbine engine components for large aircraft is primarily attributable to the overall weak global economic conditions and the related impact such conditions have had on commercial aviation.

The ACM Group’s airframe and turbine engine component products have both military and commercial applications. Net sales of airframe and turbine engine components that solely have military applications were $35.0 million in fiscal 2009, compared with $33.6 million in fiscal 2008. This increase is attributable in part to increased military spending due to ongoing wartime demand such as for additional military helicopters and related replacement components.

The ACM Group’s selling, general and administrative expenses decreased $0.7 million to $4.2 million, or 6.1% of net sales, in fiscal 2009, compared with $4.9 million, or 6.8% of net sales, in fiscal 2008. Included in selling, general and administrative expenses in fiscal 2008 was $0.5 million related to the payment to a customer that (i) was made to achieve an amicable business settlement of a product dispute and (ii) that the Company agreed to make as a business gesture of good faith and cooperation without admission of liability. The remaining selling, general and administrative expenses in fiscal 2008 were $4.4 million, or 6.1% of net sales. The remaining $0.2 million decrease in selling, general and administrative expenses in fiscal 2009 compared with fiscal 2008 was principally due to a $0.1 million decrease in variable selling cost principally due to the decrease in net sales.

During the fourth quarter of fiscal 2008, the ACM group recorded $0.8 million of expense related the impairment of a long-lived asset.

The ACM Group’s operating income in fiscal 2009 was $13.4 million, compared with $9.9 million in fiscal 2008. Operating results in fiscal 2009 were favorably impacted by (i) an approximate $3.3 million reduction in the LIFO expense in fiscal 2009, compared with fiscal 2008, (ii) lower expenditures for natural gas principally due to lower consumption and (iii) the negative impact in fiscal 2008, of the aforementioned $0.5 million settlement expense and $0.8 million impairment expense. These improvements were partially offset by the negative impact of (i) higher manufacturing labor and benefits expense due to higher average levels of employment and (ii) an increase in other manufacturing overhead costs incurred in fiscal 2009, compared with fiscal 2008.

Turbine Component Services and Repair Group (“Repair Group”)

During fiscal 2009, net sales, which consist principally of component repair services (including precision component machining and industrial coating) for small aerospace turbine engines, decreased 19.6% to $11.5 million, compared with $14.3 million in fiscal 2008. The Repair Group’s decrease in net sales is primarily due to the overall weak global economic conditions.

During fiscal 2009, the Repair Group’s selling, general and administrative expenses were $1.3 million, or 11.0% of net sales, compared with $1.3 million, or 9.2% of net sales, in fiscal 2008.

The Repair Group’s operating income in fiscal 2009 was $0.1 million, compared with an operating loss of $0.3 million in fiscal 2008. Operating results in fiscal 2009 were positively impacted principally by (i) an increase in selling prices, (ii) $0.1 million of income related to the favorable settlements of certain obligations and (iii) the improved management of operating expenses, principally labor costs. Although sales volumes were higher in fiscal 2008, operating results were negatively impacted in fiscal 2008 by startup costs related to the production launch of a new component repair program.

As discussed in the Company’s Form 8-K filed on January 20, 2009, the Company is exploring strategic alternatives for the Repair Group for the purpose of enhancing shareholder value. The Company is conducting an orderly and comprehensive review and evaluation of strategic alternatives available to it, including a divestiture of the Repair Group.

Applied Surface Concepts Group (“ASC Group”)

Net sales decreased 9.0% to $13.7 million in fiscal 2009, compared with $15.1 million in fiscal 2008. In fiscal 2009, product net sales, consisting of selective electrochemical metal finishing equipment and solutions, decreased $0.4 million to $7.1 million, compared with $7.5 million in fiscal 2008. In fiscal 2009, customized selective electrochemical metal finishing contract service net sales decreased $0.9 million to $6.5 million, compared with $7.4 million in fiscal 2008. The overall weak global economic conditions, particularly in the oil and gas industry, negatively impacted the ASC Group’s net sales in fiscal 2009. A portion of the ASC Group’s business is conducted in Europe and is denominated in local European currencies, which have weakened in relation to the US dollar, resulting in an unfavorable currency impact on net sales in fiscal 2009 of approximately $1.0 million.

The ASC Group’s selling, general and administrative expenses decreased $0.2 million to $4.1 million, or 30.3% of net sales, in fiscal 2009, compared with $4.3 million, or 28.7% of net sales, in fiscal 2008. The decrease in selling, general and administrative expenses in fiscal 2009 was principally due to a reduction in compensation and benefit related expenses attributable to the elimination of certain positions and the temporary reduction of employee compensation.

The ASC Group’s operating income in fiscal 2009 was $0.8 million, compared with $1.3 million in fiscal 2008. This decrease in operating income was principally due to the effect of lower net sales without a corresponding decrease in operating expenses.

Corporate Unallocated Expenses

Corporate unallocated expenses, consisting of corporate salaries and benefits, legal and professional and other corporate expenses, were $1.9 million in fiscal 2009, compared with $2.0 million in fiscal 2008. The $0.1 million net decrease in fiscal 2009 is principally due to a $0.4 million decrease in legal and professional expenses in fiscal 2009, compared with fiscal 2008. This decrease was partially offset by $0.2 million of depreciation expense recorded in the fourth quarter of fiscal 2009 related to an asset that was classified as held for sale, beginning in fiscal 2008 and through the third quarter of

fiscal 2009, for which no depreciation expense was required to be recorded while it was classified as held for sale. See Note 9 to the consolidated financial statements for further discussion regarding this asset and its related classification.

Other/General

Interest expense from continuing operations was $0.1 million in both fiscal 2009 and 2008. The following table sets forth the weighted average interest rates and weighted average outstanding balances under the Company’s revolving credit agreement in fiscal years 2009 and 2008.

Weighted Average

Weighted Average

Interest Rate

Outstanding Balance

Year Ended September 30,

Year Ended September 30,

Credit Agreement

2009

2008

2009

2008

Revolving credit agreement

N/A

6.8

%

N/A

$1.4 million

The Company believes that inflation did not materially affect its results of operations in either fiscal 2009 or 2008, and does not expect inflation to be a significant factor in fiscal 2010.

2. Fiscal Year 2008 Compared with Fiscal Year 2007

Net sales from continuing operations in fiscal 2008 increased 16.2% to $101.4 million, compared with $87.3 million in fiscal 2007.

Income from continuing operations before income taxes in fiscal 2008 was $8.8 million, compared with $10.3 million in fiscal 2007. Included in the $8.8 million of income from continuing operations before income taxes in fiscal 2008 was (i) $0.5 million of expense related to the amicable business settlement of a product dispute that originated in fiscal 2007, (ii) $0.8 million of expense related to the impairment of a long-lived asset, and (iii) a LIFO provision of $1.7 million. Included in the $10.3 million of income from continuing operations before income taxes in fiscal 2007 was (i) $0.1 million of expense related to the amicable business settlement of a product dispute that originated in fiscal 2007 and (ii) a LIFO provision of $0.3 million.

Income (loss) from discontinued operations, net of tax, which includes both the industrial turbine repair business that was sold in fiscal 2007 and the large aerospace turbine engine component repair business that was sold in fiscal 2006, was income of $0.3 million in fiscal 2008, compared with a $2.0 million loss in fiscal 2007. Included in the $2.0 million loss from discontinued operations in fiscal 2007 were (i) grant income of $2.1 million and (ii) a loss of approximately $0.8 million from the divestiture in fiscal 2007 of a business and certain related assets, as explained more fully in Notes 4 and 9, respectively, to the consolidated financial statements.

Net income in fiscal 2008 was $5.8 million, compared with $6.7 million in fiscal 2007.

Aerospace Component Manufacturing Group (“ACM Group”)

Net sales in fiscal 2008 increased 20.0% to $72.0 million, compared with $60.0 million in fiscal 2007. For purposes of the following discussion, the ACM Group considers aircraft that can accommodate less than 100 passengers to be small aircraft and those that can accommodate 100 or more passengers to be large aircraft. Net sales of airframe components for small aircraft increased $7.6 million to $38.2 million in fiscal 2008, compared with $30.6 million in fiscal 2007. Net sales of turbine engine components for small aircraft, which consist primarily of business and regional jets, as well as military transport and surveillance aircraft, increased $1.8 million to $19.9 million in fiscal 2008, compared with $18.1 million in fiscal 2007. Net sales of airframe components for large aircraft increased $0.5 million to $7.6 million in fiscal 2008, compared with $7.1 million in fiscal 2007. Net sales of turbine engine components for large aircraft increased $1.3 million to $3.0 million in fiscal 2008, compared with $1.7 million in fiscal 2007. Commercial product sales and other revenues were $3.3 million and $2.5 million in fiscal 2008 and 2007, respectively.

The ACM Group’s airframe and turbine engine component products have both military and commercial applications. Net sales of airframe and turbine engine components that solely have military applications were $33.4 million in fiscal 2008,

compared with $25.7 million in fiscal 2007. This increase is attributable in part to increased military spending due to ongoing wartime demand such as for additional military helicopters and related replacement components.

The ACM Group’s selling, general and administrative expenses increased $1.2 million to $4.9 million, or 6.8% of net sales, in fiscal 2008, compared with $3.7 million, or 6.1% of net sales, in fiscal 2007. The $1.2 million increase in selling, general and administrative expenses in fiscal 2008 was principally due to a $0.6 million payment to a customer that was made to achieve an amicable business settlement of a product dispute that originated in fiscal 2007, of which $0.1 million was expensed in fiscal 2007, and that the Company agreed to make as a business gesture of good faith and cooperation without admission of liability. The remaining selling, general and administrative expenses in fiscal 2008 and 2007 were $4.4 million, or 6.1% of net sales, and $3.6 million, or 6.0% of net sales, respectively. The remaining $0.8 million increase in selling, general and administrative expenses in fiscal 2008 compared to fiscal 2007 was principally due to (i) a $0.3 million increase in variable selling cost principally due to the increase in net sales, (ii) a $0.2 million increase in compensation and related expenses, and (iii) a $0.1 million increase in bad debt expense.

During the fourth quarter of fiscal 2008, the ACM group recorded $0.8 million of expense related the impairment of a long-lived asset.

The ACM Group’s operating income in fiscal 2008 was $9.9 million, compared with $10.3 million in fiscal 2007. Included in the $9.9 million of operating income in fiscal 2008 were the aforementioned $1.3 million of expenses related to the amicable business settlement of a product dispute and the impairment of a long-lived asset. The $11.2 million of operating income in fiscal 2008, before these $1.3 million of expenses, reflected an improvement relative to fiscal 2007 principally due to the positive impact on margins resulting from higher production and sales volumes in the fiscal 2008, which allowed the ACM Group to leverage its fixed operating cost structure over more units of production and sales. The positive impact of the improved leverage of its fixed operating cost were partially offset by the negative impact of (i) a $1.4 million increase in the LIFO provision and (ii) higher variable labor costs recognized in fiscal 2008, compared to fiscal 2007.

Turbine Component Services and Repair Group (“Repair Group”)

During fiscal 2008, net sales, which consist principally of component repair services (including precision component machining and industrial coating) for small aerospace turbine engines, increased 10.8% to $14.3 million, compared with $12.9 million in fiscal 2007.

During fiscal 2008, the Repair Group’s selling, general and administrative expenses from continuing operations were $1.3 million, or 9.2% of net sales, compared with $1.4 million, or 10.5% of net sales, in fiscal 2007. Included in selling, general and administrative expenses during both fiscal 2008 and 2007 was $0.1 million of bad debt recoveries and, therefore, the remaining selling, general and administrative expenses were $1.4 million, or 9.9% of net sales, and $1.5 million, or 11.2% of net sales, during such periods, respectively.

The Repair Group’s operating results from continuing operations were a loss of $0.3 million in fiscal 2008, compared with income of $0.7 million in fiscal 2007. Included in the $0.3 million operating loss during fiscal 2008 were (i) the aforementioned $0.1 million of bad debt recovery, (ii) $0.1 million of income from the sale of previously reserved inventory, and (iii) $0.1 million of income related to the renegotiation of a vendor obligation. Despite these favorable items, the reason that operating results did not improve with the higher volumes during fiscal 2008 is due principally to startup costs related to the production launch of a new component repair program and a change in product sales mix to less favorable margin products.

Applied Surface Concepts Group (“ASC Group”)

Net sales increased 5.3% to $15.1 million, compared with $14.3 million in fiscal 2007. In fiscal 2008, product net sales, consisting of selective electrochemical metal finishing equipment and solutions, increased $0.4 million to $7.5 million, compared with $7.1 million in fiscal 2007. In fiscal 2008, customized selective electrochemical metal finishing contract service net sales increased $0.3 million to $7.4 million, compared with $7.1 million in fiscal 2007. A portion of the ASC Group’s business is conducted in Europe and is denominated in local European currencies, which have strengthened in relation to the US dollar resulting in a favorable currency impact on net sales in fiscal 2008 of approximately $0.3 million.

The ASC Group’s selling, general and administrative expenses decreased $0.1 million to $4.3 million, or 28.7% of net sales, in fiscal 2008, compared with $4.4 million, or 31.0% of net sales, in fiscal 2007. The $0.1 million decrease in selling, general and administrative expenses in fiscal 2008 was principally due to a reduction in compensation and benefit related

expenses attributable to certain salaried support positions that have either been eliminated or, if not eliminated, have not yet been replaced.

The ASC Group’s operating income in fiscal 2008 was $1.3 million, compared with $1.0 million in fiscal 2007. This $0.3 million increase in operating income is principally due to (i) a decrease in selling, general and administrative expenses discussed above and (ii) improved operating margins due to higher sales. These gains were partially offset by (i) rising precious metals commodity costs that could not be fully passed on to customers and (ii) higher compensation expense due to the hiring of additional operations personnel.

Corporate Unallocated Expenses

Corporate unallocated expenses, consisting of corporate salaries and benefits, legal and professional and other corporate expenses, were $2.0 million in fiscal 2008, compared with $1.7 million in fiscal 2007. The $0.3 million increase in fiscal 2008 is principally due to an increase in legal and professional expenses related to (i) the Company’s long-term strategic planning efforts, including its incentive compensation planning, (ii) its efforts required to achieve initial Sarbanes-Oxley compliance in fiscal 2008, and (iii) professional tax consulting services. These increases were partially offset by a decrease in incentive expense.

Other/General

Interest expense from continuing operations was $0.1 million and $0.2 million in fiscal 2008 and 2007, respectively. The following table sets forth the weighted average interest rates and weighted average outstanding balances under the Company’s revolving credit agreement in fiscal years 2008 and 2007.

		Weighted Average								Weighted Average
		Interest Rate								Outstanding Balance
		Year Ended September 30,								Year Ended September 30,
Credit Agreement		2008				2007				2008				2007
Revolving credit agreement			6.8	%			8.8	%		$1.4 million				$1.4 million

The Company believes that inflation did not materially affect its results of operations in fiscal 2008 or fiscal 2007, and does not expect inflation to be a significant factor in fiscal 2009.

B. Liquidity and Capital Resources

Cash and cash equivalents increased to $19.9 million at September 30, 2009, compared with $10.4 million at September 30, 2008. At September 30, 2009, $5.8 million of the Company’s cash and cash equivalents are in the possession of its non-U.S. subsidiaries. Distributions from the Company’s non-U.S. subsidiaries to the Company may be subject to statutory restriction, adverse tax consequences or other limitations.

The Company’s operating activities provided $15.1 million of cash (of which $15.3 million was provided by continuing operations) in fiscal 2009, compared with $9.7 million of cash provided by operating activities (of which $9.8 million was provided by continuing operations) in fiscal 2008. The $15.1 million of cash provided by operating activities in fiscal 2009 was primarily due to (i) $8.0 million of net income, (ii) the impact of such non-cash items as depreciation expense, deferred taxes and LIFO income; (iii) a $5.7 million decrease in inventory; (iv) a $2.1 million decrease in accounts receivable; and (v) a $0.4 million decrease in refundable income taxes. These sources of cash were offset principally by (i) a $1.0 million decrease in accounts payable and accrued liabilities and (ii) a $0.6 million decrease in other long-term liabilities. The changes in the components of working capital were due to factors resulting from normal business conditions of the Company, including (i) the ACM Group’s successful efforts to further improve the optimization of its inventory levels, (ii) the relative timing of collections from customers being impacted by the current global economic climate and (iii) the relative timing of payments to suppliers and tax authorities. The change in other long-term liabilities is principally attributable to pension contributions for U.S. defined benefit pension plans.

Capital expenditures were $5.3 million in fiscal 2009 compared with $2.0 in fiscal 2008. Capital expenditures during fiscal 2009 consist of $4.4 million by the ACM Group, $0.6 million by the ASC Group and $0.3 million by the Repair Group. Included in the $5.3 million is $0.9 million for the initial implementation of a new company-wide management information system. In addition to the $5.3 million expended during fiscal 2009, $2.1 million has been committed as of September 30,

2009, which includes $0.2 million for the further implementation of the new company-wide management information system. The Company anticipates that capital expenditures will be within the range of $5.5 to $6.5 million in fiscal 2010 to support the projected growth in the Company’s businesses.

At September 30, 2009, the Company had an $8.0 million revolving credit agreement with a bank, subject to sufficiency of collateral, which expires on October 1, 2010 and bears interest at the bank’s base rate. The interest rate was 3.25% at September 30, 2009. A 0.35% commitment fee is incurred on the unused balance of the revolving credit agreement. At September 30, 2009, no amount was outstanding and the Company had $7.9 million available under its $8.0 million revolving credit agreement. The Company’s revolving credit agreement is secured by substantially all of the Company’s assets located in the U.S. and a guarantee by its U.S. subsidiaries. Under its revolving credit agreement with the bank, the Company is subject to certain customary covenants. These include, without limitation, covenants (as defined) that require maintenance of certain specified financial ratios, including a minimum tangible net worth level and a minimum EBITDA level. The Company was in compliance with all applicable covenants at September 30, 2009.

The Company believes that cash flows from its operations together with existing cash reserves and the funds available under its revolving credit agreement will be sufficient to meet its working capital requirements through the end of fiscal year 2010.

C. Off-Balance Sheet Arrangements

The Company does not have any obligations that meet the definition of an off-balance sheet arrangement that have had, or are reasonably likely to have, a material effect on the Company’s financial condition or results of operations.

D. Other Contractual Obligations

The following table summarizes the Company’s outstanding contractual obligations and other commercial commitments at September 30, 2009 and the effect such obligations are expected to have on liquidity and cash flow in future periods.

						Payments Due by Period
		(Amounts in thousands)
						Less than				>1 up to				>3 up to				More than
Other Contractual Obligations		Total				1 year				3 years				5 years				5 years
Debt obligations		$	7			$	2			$	3			$	2			$	—
Capital lease obligations			269				124				145				—				—
Operating lease obligations			957				458				495				4				—
Total		$	1,233			$	584			$	643			$	6			$	—

Excluded from the foregoing Other Contractual Obligations table are open purchase orders at September 30, 2009 for raw materials and supplies required in the normal course of business. Excluded from the foregoing Other Contractual Obligations table is a $59 liability for uncertain tax positions as the Company is unable to determine at this time if and/or when this amount, or any portion thereof, will be settled. Included in other long-term liabilities in the Company’s consolidated balance sheet as of September 30, 2009 is $5.4 million of liabilities related to the Company’s defined benefit pension plans. The Company is expected to fund approximately $0.8 million of pension obligations in fiscal 2010.

E. Outlook

The Company’s Repair and ACM Groups’ businesses continue to be heavily dependent upon the strength of the commercial airlines as well as aircraft and related engine manufacturers. Consequently, the performance of the domestic and international air transport industry directly and significantly impacts the performance of the Repair and ACM Groups’ businesses.

The financial condition of many airlines in the U.S. and throughout the world, while showing improvement, continues to be weak. Some airlines have received U.S. government assistance and/or have proceeded through the bankruptcy reorganization process, while others continue to pursue major restructuring initiatives, all of which appear to have had some positive impact on operating results in recent periods. Modest improvements in the commercial airlines and the relatively stable to slightly declining demand in the commercial aircraft and related engine industries have been complemented by

relatively strong U.S. military spending for aircraft and related components. The air transport industry’s long-term outlook is for continued, steady growth. Such longer-term outlook suggests the need for additional aircraft and, therefore, growth in the requirement for airframe and engine components as well as aerospace turbine engine repairs. Although the air transport industry has recently benefited from several favorable trends, including: (i) projected growth in air traffic, (ii) major replacement and refurbishment cycles driven by the desire for more fuel efficient aircraft and fleet commonality, and (iii) the increased use of wide-body aircraft, this is changing. The current global economic downturn has created significant reductions in available capital and liquidity from banks and other providers of credit. Therefore, this downturn has adversely affected the ability of the Company’s customers to fulfill their purchase commitments on a timely basis and, as such, the level of the Company’s business. Certain of the Company’s customers have recently extended/delayed their required delivery schedules, in particular those customers in the commercial sector of the market. A continued deterioration in the global economy could result in further reduced demand for the products and services that the Company provides. The Company supplies new and spare components for military aircraft. As a result of continued military initiatives, there has been increased demand for both new and spare components for military customers. The Company’s current outlook for the air transport industry is cautiously optimistic while the military segment remains stable, and the Company does believe that it is poised to take advantage of the resulting improvement in order demand from the commercial airframe and engine manufacturers if and when it may occur.

It is difficult to determine, at this time, the potential long-term impact that the aforementioned factors may have on air travel and the demand for the products and services provided by the Company. Lack of continued improvement could result in credit risk associated with serving the financially troubled airlines and/or their suppliers. All of these consequences, to the extent that they may occur, could negatively impact the Company’s net sales, operating profits and cash flows. However, in light of the current business environment, the Company believes that cash on-hand, funds available under its revolving credit agreement, and anticipated funds generated from operations will be adequate to meet its liquidity needs through the foreseeable future.

F. Critical Accounting Policies and Estimates

Allowances for Doubtful Accounts

The Company maintains allowances for doubtful accounts for estimated losses resulting from the inability of certain customers to make required payments. The Company evaluates the adequacy of its allowances for doubtful accounts each quarter based on the customers’ credit-worthiness, current economic trends or market conditions, past collection history, aging of outstanding accounts receivable and specific identified risks. As these factors change, the Company’s allowances for doubtful accounts may change in subsequent periods. Historically, losses have been within management’s expectations and have not been significant.

Inventories

The Company maintains allowances for obsolete and excess inventory. The Company evaluates its allowances for obsolete and excess inventory each quarter. Each business segment maintains formal policies, which require at a minimum that reserves be established based on an analysis of the age of the inventory. In addition, if the Company learns of specific obsolescence, other than that identified by the aging criteria, an additional reserve will be recognized as well. Specific obsolescence may arise due to a technological or market change, or based on cancellation of an order. Management’s judgment is necessary in determining the realizable value of these products to arrive at the proper allowance for obsolete and excess inventory.

Impairment of Long-Lived Assets

The Company reviews the carrying value of its long-lived assets, including property, plant and equipment, at least annually or when events and circumstances warrant such a review. This review involves judgment and is performed using estimates of future undiscounted cash flows, which include proceeds from disposal of assets and which the Company considers a critical accounting estimate. If the carrying value of a long-lived asset is greater than the estimated undiscounted future cash flows, and if such excess carrying value is determined to be permanent, then the long-lived asset is considered impaired and an impairment charge is recorded for the amount by which the carrying value of the long-lived asset exceeds its fair value.

In projecting future undiscounted cash flows, the Company relies on internal budgets and forecasts, and projected proceeds upon disposal of long-lived assets. The Company’s budgets and forecasts are based on historical results and anticipated future market conditions, such as the general business climate and the effectiveness of competition. The Company believes that its estimates of future undiscounted cash flows and fair value are reasonable; however, changes in estimates of such

undiscounted cash flows and fair value could change the Company’s estimates of fair value, which could result in future impairment charges.

Defined Benefit Pension Plan Expense

The Company maintains three defined benefit pension plans in accordance with the requirements of the Employee Retirement Income Security Act of 1974 (“ERISA”). The amounts recognized in the consolidated financial statements for pension benefits under these three defined benefit pension plans are determined on an actuarial basis utilizing various assumptions. The discussion that follows provides information on the significant assumptions/elements associated with these defined benefit pension plans.

One significant assumption in determining net pension expense is the expected return on plan assets. The Company determines the expected return on plan assets principally based on (i) the expected return for the various asset classes in the respective plans’ investment portfolios and (ii) the targeted allocation of the respective plans’ assets. The expected return on plan assets is developed using historical asset return performance as well as current and anticipated market conditions such as inflation, interest rates and market performance. Should the actual rate of return differ materially from the assumed/expected rate, the Company could experience a material adverse effect on the funded status of its plans and, accordingly, on its related future net pension expense.

Another significant assumption in determining the net pension expense is the discount rate. The discount rate for each plan is determined, as of the fiscal year end measurement date, using prevailing market spot-rates (from an appropriate yield curve) with maturities corresponding to the expected timing/date of the future defined benefit payment amounts for each of the respective plans. Such corresponding spot-rates are used to discount future years’ projected defined benefit payment amounts back to the fiscal year end measurement date as a present value. A composite discount rate is then developed for each plan by determining the single rate of discount that will produce the same present value as that obtained by applying the annual spot-rates. The discount rate may be further revised if the market environment indicates that the above methodology generates a discount rate that does not accurately reflect the prevailing interest rates as of the fiscal year end measurement date

Deferred Tax Valuation Allowance

The Company accounts for deferred taxes in accordance with the provisions of the Financial Accounting Standards Board (“FASB”) guidance related to accounting for income taxes, whereby the Company recognizes an income tax benefit related to its consolidated net losses and other temporary differences between financial reporting basis and tax reporting basis. At September 30, 2009 and 2008, the Company’s net deferred tax liability before any valuation allowance was a nominal amount and $1.3 million, respectively.

G. Impact of Newly Issued Accounting Standards

In September 2009, the FASB issued Accounting Standards Update (“ASU”) No. 2009-06, Income Taxes, which provided implementation guidance on the accounting for uncertainty in income taxes and disclosure amendments for nonpublic entities. The adoption of the implementation guidance will not have an impact on the Company’s consolidated financial statements and disclosures.

In July 2009, the FASB issued ASU No. 2009-01, Generally Accepted Accounting Principles (“GAAP”), which launched the Accounting Standards Codification (“Codification”), which established a two-level GAAP hierarchy for nongovernmental entities: authoritative guidance and non-authoritative guidance. The Codification is now the single source of authoritative accounting principles recognized by the FASB to be applied by nongovernmental entities in the preparation of financial statements in accordance with GAAP in the United States. All guidance in the Codification carries an equal level of authority. Rules and interpretive releases of the United States Securities and Exchange Commission (“SEC”) under authority of federal securities laws are also sources of authoritative GAAP for SEC registrants. Subsequent revisions to GAAP will be incorporated into the Codification through Accounting Standards Updates. Other than the manner in which new accounting guidance is referenced, the adoption of these changes had no impact to the financial statements of the Company.

In May 2009, the FASB issued guidance related to changes to accounting for and disclosure of events that occur after the balance sheet date but before financial statements are issued or are available to be issued, otherwise known as “subsequent events”. In particular, these changes set forth (i) the period after the balance sheet date during which management of a reporting entity should evaluate events or transactions that may occur, (ii) the circumstances under which an entity should recognize events or transactions occurring after the balance sheet date and (iii) the disclosures that an entity should make

about events or transactions that occurred after the balance sheet date. This guidance introduces the concept of financial statements being available to be issued. It requires the disclosure of (i) the date through which an entity has evaluated subsequent events and (ii) the basis for that date, that is, whether that date represents the date the financial statements were issued or were available to be issued. This guidance should not result in significant changes in the subsequent events that an entity reports in its financial statements and does not apply to subsequent events or transactions that are within the scope of other applicable generally accepted accounting principles that provide different guidance on the accounting treatment for subsequent events or transactions. The adoption of these changes had no significant impact to the financial statements of the Company.

In December 2008, the FASB issued guidance related to employers’ disclosure about postretirement benefit plan assets. Such disclosures should provide users of financial statements with an understanding of (i) how investment allocation decisions are made, (ii) major categories of plan assets, (iii) how fair value of plan assets are measured, (iv) the effect of fair value measurements on changes in plan assets during a period and (v) significant concentrations of risk within plan assets. The requirements of this new disclosure about plan assets shall be provided for fiscal years ending after December 15, 2009.

Item 7A.		Quantitative and Qualitative Disclosures about Market Risk

In the ordinary course of business, the Company is subject to foreign currency and interest rate risk. The risks primarily relate to the sale of the Company’s products in transactions denominated in non-U.S. dollar currencies (the Euro, Pound Sterling and the Swedish Krona); the payment in local currency of wages and other costs related to the Company’s non-U.S. operations; and changes in interest rates on the Company’s long-term debt obligations. The Company does not hold or issue financial instruments for trading purposes.

A. Foreign Currency Risk

The U.S. dollar is the functional currency for all of the Company’s U.S. operations. For these operations, all gains and losses from completed currency transactions are included in income currently. For the Company’s non-U.S. subsidiaries, the functional currency is the local currency. Assets and liabilities are translated into U.S. dollars at the rate of exchange at the end of the period and revenues and expenses are translated using average rates of exchange. Foreign currency translation adjustments are reported as a component of accumulated other comprehensive loss.

Historically, the Company has been able to mitigate the impact of foreign currency risk by means of hedging such risk through the use of foreign currency exchange contracts, which typically expire within one year. However, such risk is mitigated only for the periods for which the Company has foreign currency exchange contracts in effect, and only to the extent of the U.S. dollar amounts of such contracts. At September 30, 2009, the Company had no forward exchange contracts outstanding. The Company will continue to evaluate its foreign currency risk, if any, and the effectiveness of using similar hedges in the future to mitigate such risk.

At September 30, 2009, the Company’s assets and liabilities denominated in the Pound Sterling, the Euro and Swedish Krona were as follows (amounts in thousands):

		Pound Sterling				Euro				Swedish Krona
Cash and cash equivalents			35				585				1,508
Accounts receivable			122				397				841
Accounts payable			31				79				91
Accrued liabilities			99				107				2,213

B. Interest Rate Risk

The Company’s primary interest rate risk exposure results from the variable interest rate mechanisms associated with the Company’s long-term debt consisting of a revolving credit agreement with a bank. If interest rates were to increase or decrease 100 basis points (1%) from the September 30, 2009 rate, and assuming no change in the amount outstanding under the revolving credit agreement, annual interest expense to the Company would be nominally impacted. The Company’s sensitivity analyses of the effects of changes in interest rates do not consider the impact of a potential change in the level of variable rate borrowings or derivative instruments outstanding that could take place if these hypothetical conditions prevail. At September 30, 2009, the Company is not a party to any hedging or other interest rate risk management agreements.

Item 8.		Financial Statements and Supplementary Data

Report of Independent Registered Public Accounting Firm

To the Board of Directors and Shareholders of SIFCO Industries, Inc. and Subsidiaries:

We have audited the accompanying consolidated balance sheets of SIFCO Industries, Inc. (an Ohio Corporation) and Subsidiaries as of September 30, 2009 and 2008, and the related consolidated statements of operations, shareholders’ equity and cash flows for each of the three years in the period ended September 30, 2009. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of SIFCO Industries, Inc. and Subsidiaries as of September 30, 2009 and 2008, and the results of their operations and their cash flows for each of the three years in the period ended September 30, 2009 in conformity with accounting principles generally accepted in the United States of America.

Our audit was conducted for the purpose of forming an opinion on the basic financial statements taken as a whole. Schedule II is presented for purposes of additional analysis and is not a required part of the basic financial statements. This schedule has been subjected to the auditing procedures applied in the audit of the basic financial statements and, in our opinion, is fairly stated in all material respects in relation to the basic financial statements taken as a whole.

/s/ GRANT THORNTON LLP

Cleveland, Ohio
December 15, 2009

SIFCO Industries, Inc. and Subsidiaries
Consolidated Statements of Operations
(Amounts in thousands, except per share data)

		Years Ended September 30,
		2009				2008				2007
Net sales		$	93,888			$	101,391			$	87,255
Operating expenses:
Cost of goods sold			69,947				79,161				65,835
Selling, general and administrative expenses			11,465				12,495				11,173
Loss (gain) on disposal or impairment of operating assets			—				757				(137	)
Total operating expenses			81,412				92,413				76,871
Operating income			12,476				8,978				10,384
Interest income			(16	)			(24	)			(4	)
Interest expense			67				149				167
Foreign currency exchange loss (gain)			217				35				(20	)
Other income, net			(119	)			(2	)			(14	)
Income from continuing operations before income tax provision			12,327				8,820				10,255
Income tax provision			4,480				3,277				1,483
Income from continuing operations			7,847				5,543				8,772
Income (loss) from discontinued operations, net of tax			188				287				(2,044	)
Net income		$	8,035			$	5,830			$	6,728
Income per share from continuing operations
Basic		$	1.48			$	1.05			$	1.67
Diluted		$	1.47			$	1.04			$	1.66
Income (loss) per share from discontinued operations, net of tax
Basic		$	0.04			$	0.05			$	(0.39	)
Diluted		$	0.04			$	0.05			$	(0.39	)
Net income per share
Basic		$	1.52			$	1.10			$	1.28
Diluted		$	1.51			$	1.09			$	1.27
Weighted-average number of common shares (basic)			5,295				5,291				5,246
Weighted-average number of common shares (diluted)			5,325				5,340				5,286

See notes to consolidated financial statements.

SIFCO Industries, Inc. and Subsidiaries
Consolidated Balance Sheets
(Amounts in thousands, except per share data)

		September 30,
		2009				2008
ASSETS
Current assets:
Cash and cash equivalents		$	19,875			$	10,440
Receivables, net			17,010				19,130
Inventories			7,568				11,730
Refundable income taxes			889				1,309
Deferred income taxes			1,651				1,541
Prepaid expenses and other current assets			601				463
Assets held for sale			—				3,158
Total current assets			47,594				47,771
Property, plant and equipment:
Land			578				578
Buildings			14,748				9,933
Machinery and equipment			38,785				34,110
			54,111				44,621
Accumulated depreciation			37,171				34,368
Property, plant and equipment, net			16,940				10,253
Other assets			1,236				2,125
Total assets		$	65,770			$	60,149
LIABILITIES AND SHAREHOLDERS’ EQUITY
Current liabilities:
Current maturities of long-term debt		$	101			$	94
Accounts payable			7,629				8,310
Accrued liabilities			4,324				5,052
Total current liabilities			12,054				13,456
Long-term debt, net of current maturities			154				269
Deferred income taxes			2,110				3,295
Other long-term liabilities			6,207				2,450
Shareholders’ equity:
Serial preferred shares, no par value, authorized 1,000 shares			—				—
Common shares, par value $1 per share, authorized 10,000 shares; issued and outstanding 5,298 shares in 2009 and 5,295 shares in 2008			5,298				5,295
Additional paid-in capital			6,490				6,399
Retained earnings			43,160				35,658
Accumulated other comprehensive loss			(9,703	)			(6,673	)
Total shareholders’ equity			45,245				40,679
Total liabilities and shareholders’ equity		$	65,770			$	60,149

See notes to consolidated financial statements.

SIFCO Industries, Inc. and Subsidiaries
Consolidated Statements of Cash Flows
(Amounts in thousands)

		Years Ended September 30,
		2009				2008				2007
Cash flows from operating activities:
Net income		$	8,035			$	5,830			$	6,728
Loss (income) from discontinued operations, net of tax			(188	)			(287	)			2,044
Adjustments to reconcile net income to net cash provided by (used for) operating activities:
Depreciation and amortization			1,825				1,483				1,447
Loss (gain) on disposal of property, plant and equipment			(5	)			1				(141	)
LIFO (income) provision			(1,583	)			1,712				331
Deferred income taxes			580				1,184				1,208
Share transactions under employee stock plan			94				60				88
Asset impairment charges			—				757				—
Changes in operating assets and liabilities:
Receivables			2,128				(58	)			(3,512	)
Inventories			5,726				3,412				(9,528	)
Refundable income taxes			420				(1,311	)			8
Prepaid expenses and other current assets			(136	)			(110	)			11
Other assets			4				(184	)			888
Accounts payable			(746	)			(650	)			(148	)
Accrued liabilities			(236	)			(705	)			371
Other long-term liabilities			(644	)			(1,337	)			(915	)
Net cash provided by (used for) operating activities of continuing operations			15,274				9,797				(1,120	)
Net cash used for operating activities of discontinued operations			(191	)			(62	)			(3,248	)
Cash flows from investing activities:
Capital expenditures			(5,256	)			(2,012	)			(874	)
Proceeds from disposal of property, plant and equipment			5				1				63
Acquisition of business			—				—				—
Other			—				—				118
Net cash used for investing activities of continuing operations			(5,251	)			(2,011	)			(693	)
Net cash provided by investing activities of discontinued operations			—				—				3,228
Cash flows from financing activities:
Proceeds from revolving credit agreement			—				21,029				32,091
Repayments of revolving credit agreement			—				(23,629	)			(29,908	)
Proceeds from other indebtedness			—				—				180
Repayments of long-term debt			(2	)			—				(236	)
Dividends declared			(529	)			—				—
Repayments of capital lease obligations			(106	)			(109	)			(75	)
Net cash provided by (used for) financing activities of continuing operations			(637	)			(2,709	)			2,052
Increase in cash and cash equivalents			9,195				5,015				219
Cash and cash equivalents at beginning of year			10,440				5,510				4,744
Effect of exchange rate changes on cash and cash equivalents			240				(85	)			547
Cash and cash equivalents at end of year		$	19,875			$	10,440			$	5,510
Supplemental disclosure of cash flow information:
Cash paid for interest		$	(52	)		$	(172	)		$	(107	)
Cash paid for income taxes, net		$	(4,061	)		$	(3,598	)		$	(635	)

See notes to consolidated financial statements.

SIFCO Industries, Inc. and Subsidiaries
Consolidated Statements of Shareholders’ Equity
(Amounts in thousands)

														Accumulated
						Additional								Other				Total
						Paid-In				Retained				Comprehensive				Shareholders’
		Common Shares				Capital				Earnings				Loss				Equity
Balance — September 30, 2006		$	5,222			$	6,323			$	23,100			$	(9,462	)		$	25,183
Comprehensive income:
Net income			—				—				6,728				—				6,728
Foreign currency translation adjustment			—				—				—				2,285				2,285
Minimum pension liability adjustment, net of tax			—				—				—				2,819				2,819
Total comprehensive income																			11,832
Pension liability adjustment, net of tax as of September 30, 2007			—				—				—				(325	)			(325	)
Stock option expense			—				32				—				—				32
Share transactions under employee stock plans			59				(3	)			—				—				56
Balance — September 30, 2007		$	5,281			$	6,352			$	29,828			$	(4,683	)		$	36,778
Comprehensive income:
Net income			—				—				5,830				—				5,830
Foreign currency translation adjustment			—				—				—				(500	)			(500	)
Pension liability adjustment, net of tax			—				—				—				(1,490	)			(1,490	)
Total comprehensive income																			3,840
Stock option and performance share expense			—				50				—				—				50
Share transactions under employee stock plans			14				(3	)			—				—				11
Balance — September 30, 2008		$	5,295			$	6,399			$	35,658			$	(6,673	)		$	40,679
Comprehensive income:
Net income			—				—				8,035				—				8,035
Foreign currency translation adjustment			—				—				—				212				212
Pension liability adjustment, net of tax			—				—				(4	)			(3,242	)			(3,246	)
Total comprehensive income																			5,001
Dividend declared											(529	)							(529	)
Stock option and performance share expense			—				82				—				—				82
Share transactions under employee stock plans			3				9				—				—				12
Balance — September 30, 2009		$	5,298			$	6,490			$	43,160			$	(9,703	)		$	45,245

See notes to consolidated financial statements.

SIFCO Industries, Inc. and Subsidiaries
Notes to Consolidated Financial Statements
Years ended September 30, 2009, 2008 and 2007
(Dollars in thousands, except share and per share data)

1. Summary of Significant Accounting Policies

A. DESCRIPTION OF BUSINESS

SIFCO Industries, Inc. and Subsidiaries (the “Company”) are engaged in the production and sale of a variety of metalworking processes, services and products produced primarily to the specific design requirements of its customers. The processes and services include forging, heat-treating, coating, welding, machining, and selective electrochemical finishing. The products include forged components, machined forged parts and other machined metal parts, remanufactured components for turbine engines, and selective electrochemical finishing solutions and equipment. The Company’s operations are conducted in three business segments: (i) Aerospace Component Manufacturing Group, (ii) Turbine Component Services and Repair Group and (iii) Applied Surface Concepts Group.

B. PRINCIPLES OF CONSOLIDATION

The accompanying consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries. All significant intercompany accounts and transactions have been eliminated. The U.S. dollar is the functional currency for all the Company’s U.S. operations. For these operations, all gains and losses from completed currency transactions are included in income currently. The functional currency for the Company’s other non-U.S. subsidiaries is the local currency. Assets and liabilities are translated into U.S. dollars at the rates of exchange at the end of the period, and revenues and expenses are translated using average rates of exchange. Foreign currency translation adjustments are reported as a component of accumulated other comprehensive loss in the consolidated statements of shareholders’ equity.

C. CASH EQUIVALENTS

The Company considers all highly liquid short-term investments with original maturities of three months or less to be cash equivalents.

D. CONCENTRATIONS OF CREDIT RISK

Receivables are presented net of allowance for doubtful accounts of $633 and $583 at September 30, 2009 and 2008, respectively. During fiscal 2009 and 2008, $141 and $257 of accounts receivable were written off against the allowance for doubtful accounts, respectively. Bad debt expense totaled $195, $254 and $147 in fiscal 2009, 2008 and 2007, respectively.

Most of the Company’s receivables represent trade receivables due from manufacturers of turbine engines and aircraft components and turbine engine overhaul companies located throughout the world, including a significant concentration of U.S. based companies. Approximately 41% of the Company’s net sales in fiscal 2009 were to four of its largest customers, with an additional 14% of combined net sales to various direct subcontractors to these customers. No other single group or customer represents greater than 5% of total net sales in fiscal 2009. The Company performs ongoing credit evaluations of its customers’ financial conditions. The Company believes its allowance for doubtful accounts is sufficient based on the credit exposures outstanding at September 30, 2009.

E. INVENTORY VALUATION

Inventories are stated at the lower of cost or market. Cost is determined by the Company’s ACM Group using the last-in, first-out (“LIFO”) method for approximately 72% and 76% of the Company’s inventories at September 30, 2009 and 2008, respectively. The first-in, first-out (“FIFO”) method is used to value the remainder of the Company’s inventories.

The Company maintains allowances for obsolete and excess inventory. The Company evaluates its allowances for obsolete and excess inventory each quarter. Each business segment maintains formal policies, which require at a minimum that reserves be established based on an analysis of the age of the inventory. In addition, if the Company identifies specific obsolescence, other than that identified by the aging criteria, an additional reserve will be recognized as well. Specific obsolescence may arise due to a technological or market change, or based on cancellation of an order. The Company’s allowances for obsolete and excess inventory were $1,319 and $1,061 at September 30, 2009 and 2008, respectively.

F. PROPERTY, PLANT AND EQUIPMENT

Property, plant and equipment are stated at cost. Depreciation is generally computed using the straight-line and the double declining balance methods. Depreciation is provided in amounts sufficient to amortize the cost of the assets over their estimated useful lives. Depreciation provisions are based on estimated useful lives: (i) buildings, including building improvements — 5 to 50 years and (ii) machinery and equipment, including office and computer equipment — 3 to 30 years.

SIFCO Industries, Inc. and Subsidiaries
Notes to Consolidated Financial Statements — (Continued)

The Company reviews the carrying value of its long-lived assets, including property, plant and equipment, at least annually or when events and circumstances warrant such a review. This review is performed using estimates of future undiscounted cash flows, which include proceeds from disposal of assets. If the carrying value of a long-lived asset is greater than the estimated undiscounted future cash flows, and if such excess carrying value is determined to be permanent, then the long-lived asset is considered impaired and an impairment charge is recorded for the amount by which the carrying value of the long-lived asset exceeds its fair value. Asset impairment charges of $757 were recorded in the fourth quarter of fiscal 2008 related to certain machinery and equipment of the Company’s ACM Group. The machinery and equipment was determined to be permanently impaired and, therefore, the carrying value of such assets was reduced to its net realizable value.

G. NET INCOME PER SHARE

The Company’s net income per basic share has been computed based on the weighted-average number of common shares outstanding. Net income per diluted share reflects the effect of the Company’s outstanding stock options under the treasury stock method. However, during periods of operating losses, outstanding stock options are not included in the calculation of net loss per diluted share because such inclusion would be anti-dilutive.

H. REVENUE RECOGNITION

The Company recognizes revenue in accordance with the relevant portions of the guidance provided by the United States Securities and Exchange Commission (“SEC”) related to revenue recognition in financial statements. Revenue is generally recognized when products are shipped or services are provided to customers.

I. IMPACT OF RECENTLY ADOPTED ACCOUNTING

In September 2009, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update No. 2009-06, Income Taxes, which provided implementation guidance on the accounting for uncertainty in income taxes and disclosure amendments for nonpublic entities. The adoption of the implementation guidance did not have an impact on the Company’s consolidated financial statements and disclosures.

In July 2009, the FASB issued ASU No. 2009-01, Generally Accepted Accounting Principles (“GAAP”), which launched the Accounting Standards Codification (“Codification”), which established a two-level GAAP hierarchy for nongovernmental entities: authoritative guidance and non-authoritative guidance. The Codification is now the single source of authoritative accounting principles recognized by the FASB to be applied by nongovernmental entities in the preparation of financial statements in accordance with GAAP in the United States. All guidance in the Codification carries an equal level of authority. Rules and interpretive releases of the SEC under authority of federal securities laws are also sources of authoritative GAAP for SEC registrants. Subsequent revisions to GAAP will be incorporated into the Codification through Accounting Standards Updates (“ASU”). Other than the manner in which new accounting guidance is referenced, the adoption of these changes had no significant impact to the financial statements of the Company.

In May 2009, the FASB issued guidance related to changes to accounting for and disclosure of events that occur after the balance sheet date but before financial statements are issued or are available to be issued, otherwise known as “subsequent events”. In particular, these changes set forth (i) the period after the balance sheet date during which management of a reporting entity should evaluate events or transactions that may occur, (ii) the circumstances under which an entity should recognize events or transactions occurring after the balance sheet date and (iii) the disclosures that an entity should make about events or transactions that occurred after the balance sheet date. This guidance introduces the concept of financial statements being available to be issued. It requires the disclosure of (i) the date through which an entity has evaluated subsequent events and (ii) the basis for that date, that is, whether that date represents the date the financial statements were issued or were available to be issued. This guidance should not result in significant changes in the subsequent events that an entity reports in its financial statements and does not apply to subsequent events or transactions that are within the scope of other applicable generally accepted accounting principles that provide different guidance on the accounting treatment for subsequent events or transactions. The adoption of these changes had no significant impact to the financial statements of the Company.

In September 2006, the FASB issued amended guidance related to employers’ accounting for defined benefit pension and other postretirement plans. This amended guidance requires an employer to (i) recognize the overfunded or underfunded status of a defined benefit pension plan, measured as the difference between plan assets at fair value and the benefit obligation, as an asset or liability in its statement of financial position; (ii) recognize, through other comprehensive income, changes in the funded status in the year in which the changes occur; (iii) recognize as a component of other comprehensive income, net of tax, the gains or losses and prior service costs or credits that arise during the period, but that are not

SIFCO Industries, Inc. and Subsidiaries
Notes to Consolidated Financial Statements — (Continued)

recognized as components of net periodic benefit cost; and (iv) measure defined benefit plan assets and obligations as of the date of the employer’s fiscal year end. The Company adopted the requirement to recognize the funded status of its defined benefit pension plans as an asset or liability in the consolidated balance sheet as of September 30, 2007. The Company adopted the requirement to measure plan assets and benefit obligations as of the date of the Company’s fiscal year-end consolidated balance sheet on October 1, 2008, the impact of which was not material to the Company’s financial statements.

J. IMPACT OF NEWLY ISSUED ACCOUNTING STANDARDS

In December 2008, the FASB issued guidance related to employers’ disclosure about postretirement benefit plan assets. Such disclosures should provide users of financial statements with an understanding of (i) how investment allocation decisions are made, (ii) major categories of plan assets, (iii) how fair value of plan assets are measured, (iv) the effect of fair value measurements on changes in plan assets during a period and (v) significant concentrations of risk within plan assets. The requirements of this new disclosure about plan assets shall be provided for fiscal years ending after December 15, 2009.

K. USE OF ESTIMATES

GAAP in the United States requires management to make a number of estimates and assumptions relating to the reported amounts of assets and liabilities and the disclosure of contingent liabilities, at the date of the consolidated financial statements, and the reported amounts of revenues and expenses during the period in preparing these financial statements. Actual results could differ from those estimates.

L. DERIVATIVE FINANCIAL INSTRUMENTS

The Company has from time-to-time utilized foreign currency exchange contracts as part of the management of its foreign currency risk exposure. The Company has no financial instruments held for trading purposes. All financial instruments are put into place to hedge specific risk exposure. To qualify as a hedge, the item to be hedged must expose the Company to foreign currency risk and the hedging instrument must effectively reduce that risk. If the financial instrument is designated as a cash flow hedge, the effective portions of changes in the fair value of the financial instrument are recorded in accumulated other comprehensive loss in the shareholders’ equity section of the consolidated balance sheets. Ineffective portions of changes in the fair value of the financial instrument, to the extent they may exist, are recognized in the consolidated statements of operations.

Historically, the Company has been able to mitigate the impact of foreign currency risk by means of hedging such risk through the use of foreign currency exchange contracts, which typically expire within one year. However, such risk is mitigated only for the periods for which the Company has foreign currency exchange contracts in effect, and only to the extent of the U.S. dollar amounts of such contracts. At September 30, 2009 and 2008, the Company had no forward exchange contracts outstanding.

M. RESEARCH AND DEVELOPMENT

Research and development costs from continuing operations are expensed as incurred. Research and development expense from continuing operations was approximately $705, $672 and $880 in fiscal 2009, 2008 and 2007, respectively.

N. ACCUMULATED OTHER COMPREHENSIVE LOSS

Comprehensive income is included on the consolidated statements of shareholders’ equity. The components of accumulated other comprehensive loss as shown on the consolidated balance sheets at September 30 are as follows:

		2009				2008				2007
Foreign currency translation adjustment		$	(4,646	)		$	(4,858	)		$	(4,358	)
Net pension liability adjustment, net of income tax benefit of $3,082, $1,105 and $167, respectively			(5,057	)			(1,815	)			(325	)
Total accumulated other comprehensive loss		$	(9,703	)		$	(6,673	)		$	(4,683	)

SIFCO Industries, Inc. and Subsidiaries
Notes to Consolidated Financial Statements — (Continued)

O. INCOME TAXES

The Company files a consolidated U.S. federal income tax return and tax returns in various state and local jurisdictions. The Company’s non-U.S. subsidiaries also file tax returns in various jurisdictions, including the United Kingdom, France and Sweden. The Company has not provided U. S. deferred income taxes on certain cumulative earnings of non-U.S. subsidiaries that have been reinvested indefinitely. A U.S. deferred income tax provision has been made for the balance of the earnings of the non-U.S. subsidiaries.

The Company accounts for income taxes in accordance with the FASB’s guidance related to accounting for income taxes, as amended. Deferred income taxes (i) are provided for the temporary difference between the financial reporting basis and tax basis of the Company’s assets and liabilities and (ii) are measured using the enacted tax rates that are assumed to be in effect when the differences reverse. Deferred tax assets result principally from recording certain expenses in the financial statements in excess of amounts currently deductible for tax purposes. Deferred tax liabilities result principally from tax depreciation in excess of book depreciation and unremitted foreign earnings.

The Company maintains a valuation allowances against its deferred tax assets when management believes it is more likely than not that all or a portion of a deferred tax asset may not be realized. Changes in valuation allowances are included in the income tax provision in the period of change. In determining whether a valuation allowance is warranted, the Company evaluates factors such as prior earnings history, expected future earnings, carry-back and carry-forward periods and tax strategies that could potentially enhance the likelihood of the realization of a deferred tax asset.

P. RECLASSIFICATIONS

Certain amounts in prior years may have been reclassified to conform to the 2009 consolidated financial statement presentation.

Q. SUBSEQUENT EVENTS

Management has evaluated subsequent events through December 14, 2009, the day immediately prior to the date the financial statements were issued, and has determined there are no subsequent events to be reported.

2. Inventories

Inventories at September 30 consist of:

		2009				2008
Raw materials and supplies		$	2,539			$	3,792
Work-in-process			2,350				5,574
Finished goods			2,679				2,364
Total inventories		$	7,568			$	11,730

If the FIFO method had been used for the entire Company, inventories would have been $7,320 and $8,903 higher than reported at September 30, 2009 and 2008, respectively.

SIFCO Industries, Inc. and Subsidiaries
Notes to Consolidated Financial Statements — (Continued)

3. Accrued Liabilities

Accrued liabilities at September 30 consist of:

		2009				2008
Accrued employee compensation and benefits		$	1,764			$	1,836
Accrued workers’ compensation			1,266				1,107
Accrued income taxes			—				221
Accrued utilities			261				388
Accrued legal and professional			81				331
Accrued dividends			529				—
Other accrued liabilities			423				1,169
Total accrued liabilities		$	4,324			$	5,052

4. Government Grants

The Company received grants from certain government entities as an incentive to invest in facilities, research and employees. The Company has historically elected to treat capital and employment grants as a contingent obligation and does not commence amortizing such grants into income until such time that it is more certain that the Company will not be required to repay a portion of these grants. Capital grants are amortized into income over the estimated useful lives of the related assets. Employment grants are amortized into income over five years.

Certain grants that were subject to repayment expired during fiscal 2007. Therefore, the Company will not be required to repay such grants and, accordingly, the Company recognized grant income of $2,143 in income (loss) from discontinued operations, net of tax, during fiscal 2007 in the accompanying consolidated statement of operations. The unamortized portion of deferred grant revenue is recorded in other long-term liabilities at September 30, 2009 and September 30, 2008, which amounted to $454 and $442, respectively. The majority of the Company’s grants are denominated in Euros. The Company adjusts its deferred grant revenue balance in response to currency exchange rate fluctuations for as long as such grants are treated as obligations.

5. Long-Term Debt

Long-term debt at September 30 consists of:

		2009				2008
Revolving credit agreement		$	—			$	—
Capital lease obligations			248				354
Other			7				9
			255				363
Less — current maturities			101				94
Total long-term debt		$	154			$	269

At September 30, 2009, the Company had an $8,000 revolving credit agreement with a bank subject to sufficiency of collateral that expires on October 1, 2010 and bears interest at the bank’s base rate. The interest rate was 3.25% and 5.00% at September 30, 2009 and 2008, respectively. The daily average balance outstanding against the revolving credit agreement was zero and $1,406 during 2009 and 2008, respectively. A commitment fee of 0.35% is incurred on the unused balance. At September 30, 2009 the Company had $7,955 available under its $8,000 revolving credit agreement. The Company’s revolving credit agreement is secured by substantially all of the Company’s assets located in the United States of America and a guarantee by its U.S. subsidiaries.

Under its revolving credit agreement with the bank, the Company is subject to certain customary covenants. These include, without limitation, covenants (as defined) that require maintenance of certain specified financial ratios, including a minimum tangible net worth level and a minimum EBITDA level. The Company was in compliance with all applicable covenants at September 30, 2009.

SIFCO Industries, Inc. and Subsidiaries
Notes to Consolidated Financial Statements — (Continued)

6. Income Taxes

The components of income from continuing operations before income tax provision are as follows:

		Years Ended September 30,
		2009				2008				2007
U.S		$	12,253			$	8,282			$	9,876
Non-U.S			74				538				379
Income (loss) from continuing operations before income tax provision		$	12,327			$	8,820			$	10,255

The income tax provision consists of the following:

		Years Ended September 30,
		2009				2008				2007
Current income tax provision:
U.S. federal		$	3,209			$	1,550			$	95
U.S. state and local			512				336				115
Non-U.S			150				210				65
Total current tax provision			3,871				2,096				275
Deferred income tax provision (benefit):
U.S. federal			423				1,066				1,276
U.S. state and local			161				163				(83	)
Non-U.S			25				(48	)			15
Total deferred tax provision			609				1,181				1,208
Income tax provision		$	4,480			$	3,277			$	1,483

The income tax provision differs from amounts currently payable or refundable due to certain items reported for financial statement purposes in periods that differ from those in which they are reported for tax purposes. The income tax provision in the accompanying consolidated statements of operations differs from amounts determined by using the statutory rate as follows:

		Years Ended September 30,
		2009				2008				2007
Income from continuing operations before income tax provision		$	12,327			$	8,820			$	10,255
Less-U.S. state and local income tax provision			673				499				32
Income from continuing operations before U.S. and non-U.S. federal income tax provision		$	11,654			$	8,321			$	10,223
Income tax provision at U.S. federal statutory rates		$	3,979			$	2,829			$	3,476
Tax effect of:
Business expenses not deductible for tax			(177	)			27				265
Recognition of excess tax basis of assets			—				—				(704	)
Undistributed earnings of non-U.S. subsidiaries			(91	)			11				1,837
Reversal of deferred tax valuation allowance			—				—				(2,999	)
State and local income taxes			631				499				32
Other			138				(89	)			(424	)
Income tax provision		$	4,480			$	3,277			$	1,483

SIFCO Industries, Inc. and Subsidiaries
Notes to Consolidated Financial Statements — (Continued)

Deferred tax assets and liabilities at September 30 consist of the following:

		2009				2008
Deferred tax assets:
Net non-U.S. operating loss carryforwards		$	626			$	622
Employee benefits			2,019				433
Inventory reserves			705				621
Asset impairment reserve			348				366
Allowance for doubtful accounts			175				136
Foreign tax credits			3,055				2,822
Other			59				86
Total deferred tax assets			6,987				5,086
Deferred tax liabilities:
Depreciation			(2,129	)			(1,819	)
Unremitted foreign earnings			(4,850	)			(4,541	)
Total deferred tax liabilities			(6,979	)			(6,360	)
Net deferred tax liabilities			8				(1,274	)
Valuation allowance			(467	)			(480	)
Net deferred tax liabilities		$	(459	)		$	(1,754	)

At September 30, 2009 the Company has non-U.S. tax loss carryforwards of approximately $6,032. The non-U.S. tax loss carryforwards do not expire.

During fiscal 2007, the Company recorded a decrease of $4,092 in the valuation allowance against its net deferred tax assets. In assessing the Company’s ability to realize its net deferred tax assets, management considers whether it is more likely than not that some portion or all of its net deferred tax assets may not be realized. Management considered the scheduled reversal of deferred tax liabilities, projected future taxable income and tax planning strategies in making this assessment. Future reversal of the remaining valuation allowance may be achieved either when the tax benefit is realized or when it has been determined that it is more likely than not that the benefit will be realized through future taxable income. $2,999 of the valuation allowance reversal was recognized in the Company’s fiscal 2007 income tax provision. $958 of the valuation allowance reversal related to the Company’s pension liabilities and, therefore, was recognized through other comprehensive income. The Company recognized reductions of the valuation allowance against its net deferred tax assets in fiscal years 2009 and 2008 of $13 and $36, respectively.

Cumulative undistributed earnings of non-U.S. subsidiaries for which no U.S. deferred federal income tax liabilities have been established were approximately $2,088 at September 30, 2009. The incremental U.S. federal income tax related to any repatriation of these cumulative foreign earnings is indeterminable currently. The incremental foreign withholding taxes associated with a repatriation of all such earnings would approximate $58.

The Company has recorded a liability of $59 for uncertain tax positions and any related interest and penalties. The Company classifies interest on uncertain tax positions as interest expense and income tax penalties as selling, general and administrative expenses. The Company is subject to income taxes in the U.S. federal jurisdiction, and various state, local and non-U.S. jurisdictions. The Company’s federal income tax return for fiscal 2007 is under review by the Internal Revenue Service, the outcome of which is not known at this time. Management believes that the Company has appropriate support for its 2007 federal income tax return. The Company is no longer subject to U.S. federal, state and local or non-U.S. income tax examinations for the years prior to fiscal year 2002.

SIFCO Industries, Inc. and Subsidiaries
Notes to Consolidated Financial Statements — (Continued)

7. Retirement Benefit Plans

The Company and certain of its subsidiaries sponsor defined benefit pension plans covering most of its employees. The Company’s funding policy for U.S. defined benefit pension plans is based on an actuarially determined cost method allowable under Internal Revenue Service regulations. One of the Company’s U.S. defined benefit pension plans, which plan covers substantially all non-union employees of the Company’s U.S. operations who were hired prior to March 1, 2003, was frozen in 2003. Consequently, although the plan otherwise continues, the plan ceased the accrual of additional pension benefits for service subsequent to March 1, 2003.

In 2006, the Company’s Irish subsidiary advised the trustees of its two non-U.S. defined benefit pension plans that the Company would cease making contributions to such plans effective August 1, 2006. The trustees subsequently advised the Company that the trustees would wind-up both defined benefit pension plans, which wind-up process commenced in fiscal 2007 and concluded in fiscal 2008. As of September 30, 2008, the trustees advised the Company that the wind-up process for both such plans was complete with no further obligation on the part of the Company or its Irish subsidiary.

Prior to October 1, 2008, the Company used a July 1 measurement date for its U.S. defined benefit pension plans. For fiscal 2009, the measurement date changed from July 1 to September 30 as required under the amended guidance from the FASB related to employers’ accounting for defined benefit pension and other postretirement plans. The Company previously adopted the amended guidance of the FASB related to the requirement to recognize the funded status of the Company’s defined benefit pension plans as an asset or liability in the consolidated balance sheet. The net impact, as of October 1, 2008, of the measurement date change was a charge of $4 to retained earnings. As of September 30, 2009 and 2008, the Company’s defined benefit pension plans had accumulated benefit obligations of $19,600 and $16,282, respectively. Net pension expense (income) for the Company-sponsored defined benefit pension plans consists of the following:

		Years Ended September 30,
		2009				2008				2007
Service cost		$	269			$	242			$	280
Interest cost			1,067				951				990
Expected return on plan assets			(1,490	)			(1,430	)			(1,195	)
Amortization of prior service cost			140				132				132
Amortization of net (gain) loss			54				(71	)			105
Net pension expense (income) for defined benefit plan		$	40			$	(176	)		$	312

The status of all U.S. and non-U.S. defined benefit pension plans at September 30 is as follows:

		2009				2008
Benefit obligations:
Benefit obligations at beginning of year		$	16,282			$	18,789
Service cost			337				242
Interest cost			1,334				951
Amendments			65				—
Actuarial (gain) loss			2,543				(115	)
Benefits paid			(961	)			(441	)
Plan terminations			—				(3,141	)
Currency translation adjustments			—				(3	)
Benefit obligations at end of year		$	19,600			$	16,282

SIFCO Industries, Inc. and Subsidiaries
Notes to Consolidated Financial Statements — (Continued)

		2009				2008
Plan assets:
Plan assets at beginning of year		$	16,704			$	19,899
Actual return on plan assets			(1,094	)			(1,174	)
Employer contributions			739				1,564
Benefits paid			(961	)			(441	)
Plan terminations			—				(3,141	)
Currency translation adjustments			—				(3	)
Plan assets at end of year		$	15,388			$	16,704

		Plans in which								Plans in which
		Assets Exceed Benefit								Benefit Obligations
		Obligations at								Exceed Assets at
		September 30,								September 30,
		2009				2008				2009				2008
Reconciliation of funded status:
Plan assets in excess of (less than) projected benefit obligations		$	1,208			$	2,014			$	(5,420	)		$	(1,592	)
Amounts recognized in accumulated other comprehensive loss:
Net loss (gain)			(49	)			(1,070	)			7,953				3,544
Prior service cost			225				340				112				106
Net amount recognized in the consolidated balance sheets		$	1,384			$	1,284			$	2,645			$	2,058

Amounts recognized in the consolidated balance sheets are:
Other assets		$	1,208			$	2,014			$	—			$	—
Other long-term liabilities			—				—				(5,420	)			(1,592	)
Accumulated other comprehensive loss — pretax			176				(730	)			8,065				3,650
Net amount recognized in the consolidated balance sheets		$	1,384			$	1,284			$	2,645			$	2,058

The amounts in accumulated other comprehensive loss that are expected to be recognized as components of net periodic benefit costs during fiscal 2010 are as follows:

		Plans in which				Plans in which
		Assets Exceed				Benefit
		Benefit				Obligations
		Obligations				Exceed Assets
Net loss (gain)		$	(34	)		$	542
Prior service cost			93				2
Total		$	59			$	544

SIFCO Industries, Inc. and Subsidiaries
Notes to Consolidated Financial Statements — (Continued)

Where applicable, the following weighted-average assumptions were used in developing the benefit obligation and the net pension expense for defined benefit pension plans:

		Years Ended September 30,
		2009				2008				2007
Discount rate for liabilities			5.4	%			6.7	%			6.3	%
Discount rate for expenses			6.6	%			6.3	%			6.3	%
Expected return on assets			8.7	%			8.7	%			8.2	%
Rate of compensation increase			—				—				—