UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-Q

(Mark One)

x  QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the quarterly period ended June 30, 2007

 

OR

 

o  TRANSITION REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the transition period from               to               

 

Commission File Number: 0-11625

 

MFIC CORPORATION

(Exact name of registrant as specified in its charter)

Delaware

 

04-2793022

(State or other jurisdiction of

 

(I.R.S. Employer Identification No.)

incorporation or organization)

 

 

 

 

 

30 Ossipee Road, Newton, Massachusetts

 

02464

(Address of principal executive offices)

 

(Zip Code)

 

(617) 969-5452

(Registrant’s telephone number, including area code)

(Former name, former address and former fiscal year, if changed since last report)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 (the “Act”) during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.       Yes x  No o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer (as defined in Rule 12b-2 of the Act):

o  Large Accelerated Filer                         o  Accelerated Filer                            x  Non-Accelerated Filer

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).     Yes o  No x

As of August 10, 2007, 10,206,757 shares of the registrant’s Common Stock, par value $.01 per share, were outstanding.

 




MFIC CORPORATION

TABLE OF CONTENTS

PART I.

 

FINANCIAL INFORMATION

 

 

 

 

 

Item 1.

 

Condensed Consolidated Financial Statements (unaudited):

 

 

 

 

 

 

 

Condensed Consolidated Balance Sheets at June 30, 2007 and December 31, 2006

 

 

 

 

 

 

 

Condensed Consolidated Statements of Operations for the three and six months ended June 30, 2007 and 2006

 

 

 

 

 

 

 

Condensed Consolidated Statements of Cash Flows for the six months ended June 30, 2007 and 2006

 

 

 

 

 

 

 

Notes to Condensed Consolidated Financial Statements

 

 

 

 

 

Item 2.

 

Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

 

 

 

 

Item 3.

 

Quantitative and Qualitative Disclosures About Market Risk

 

 

 

 

 

Item 4.

 

Controls and Procedures

 

 

 

 

 

PART II.

 

OTHER INFORMATION

 

 

 

 

 

Item 1.

 

Legal Proceedings

 

 

 

 

 

Item 1A.

 

Risk Factors

 

 

 

 

 

Item 2.

 

Unregistered Sales of Equity Securities and Use of Proceeds

 

 

 

 

 

Item 3.

 

Defaults Upon Senior Securities

 

 

 

 

 

Item 4.

 

Submission of Matters to a Vote of Security Holders

 

 

 

 

 

Item 5.

 

Other Information

 

 

 

 

 

Item 6.

 

Exhibits

 

 

 

 

 

 

 

Signatures

 

 

 

 

 

 

 

Certifications

 

 

2




PART I.     FINANCIAL INFORMATION

ITEM 1.      FINANCIAL STATEMENTS

MFIC CORPORATION

Condensed Consolidated Balance Sheets

(Unaudited - in thousands, except share and per share amounts)

 

 

June 30,

 

December 31,

 

 

 

2007

 

2006

 

ASSETS

 

 

 

 

 

Current assets:

 

 

 

 

 

Cash and cash equivalents

 

$

1,322

 

$

1,860

 

Accounts receivable, net of allowance of $41 and $38 as of June 30, 2007 and December 31, 2006, respectively

 

2,118

 

3,253

 

Inventories

 

2,572

 

2,025

 

Prepaid and other current assets

 

350

 

350

 

Deferred income taxes

 

369

 

369

 

Total current assets

 

6,731

 

7,857

 

Property and equipment, net

 

342

 

303

 

Patents and licenses, net

 

63

 

66

 

Total assets

 

$

7,136

 

$

8,226

 

 

 

 

 

 

 

LIABILITIES AND STOCKHOLDERS’ EQUITY

 

 

 

 

 

Current liabilities:

 

 

 

 

 

Current maturities of long-term debt and obligations under capital lease

 

$

195

 

$

259

 

Accounts payable

 

187

 

247

 

Accrued expenses

 

615

 

818

 

Customer advances

 

511

 

853

 

Income taxes payable

 

 

36

 

Total current liabilities

 

1,508

 

2,213

 

 

 

 

 

 

 

Long-term liabilities

 

 

 

 

 

Current maturities of long-term debt and obligations under capital lease, net of current maturities

 

 

65

 

Total liabilities

 

1,508

 

2,278

 

 

 

 

 

 

 

Stockholders’ equity:

 

 

 

 

 

Common stock; $.01 par value; 20,000,000 shares authorized; 10,444,192 and 10,349,812 shares issued; 10,183,746 and 10,089,366 shares outstanding as of June 30, 2007 and December 31, 2006, respectively

 

104

 

104

 

Additional paid-in capital

 

17,256

 

17,052

 

Accumulated deficit

 

(11,044

)

(10,520

)

Treasury stock, 260,446 shares, at cost, as of June 30, 2007 and December 31, 2006

 

(688

)

(688

)

Total stockholders’ equity

 

5,628

 

5,948

 

Total liabilities and stockholders’ equity

 

$

7,136

 

$

8,226

 

 

See notes to unaudited condensed consolidated financial statements.

3




MFIC CORPORATION

Condensed Consolidated Statements of Operations

(Unaudited - in thousands, except share and per share amounts)

 

 

 

For The Three Months Ended
 June 30,

 

For The Six Months Ended
June 30,

 

 

 

2007

 

2006

 

2007

 

2006

 

Revenues

 

$

3,557

 

$

3,910

 

$

6,358

 

$

7,061

 

Cost of sales

 

1,453

 

1,801

 

2,646

 

3,248

 

Gross profit

 

2,104

 

2,109

 

3,712

 

3,813

 

 

 

 

 

 

 

 

 

 

 

Operating expenses:

 

 

 

 

 

 

 

 

 

Research and development

 

438

 

453

 

974

 

850

 

Selling

 

984

 

741

 

1,808

 

1,357

 

General and administrative

 

805

 

701

 

1,483

 

1,323

 

 

 

 

 

 

 

 

 

 

 

 

 

2,227

 

1,895

 

4,265

 

3,530

 

(Loss) income from operations

 

(123

)

214

 

(553

)

283

 

Interest expense

 

(1

)

(10

)

(9

)

(20

)

Interest income

 

17

 

10

 

38

 

20

 

(Loss) income before income tax provision

 

(107

)

214

 

(524

)

283

 

Income tax provision

 

 

86

 

 

113

 

Net (loss) income

 

$

(107

)

$

128

 

$

(524

)

$

170

 

Net (loss) income per common share:

 

 

 

 

 

 

 

 

 

Basic

 

$

(0.01

)

$

0.01

 

$

(0.05

)

$

0.02

 

Diluted

 

$

(0.01

)

$

0.01

 

$

(0.05

)

$

0.02

 

Weighted average number of common and common equivalent shares outstanding:

 

 

 

 

 

 

 

 

 

Basic

 

10,180

 

9,974

 

10,152

 

9,963

 

Diluted

 

10,180

 

10,990

 

10,152

 

11,038

 

 

See notes to unaudited condensed consolidated financial statements.

4




MFIC CORPORATION

Condensed Consolidated Statements of Cash Flows

(Unaudited - in thousands)

 

 

For The Six Months Ended
June 30,

 

 

 

2007

 

2006

 

Cash flows from operating activities:

 

 

 

 

 

Net (loss) income

 

$

(524)

 

$

170

 

Adjustments to reconcile net (loss) income to net cash flows:

 

 

 

 

 

Deferred taxes

 

 

113

 

Depreciation and amortization

 

82

 

93

 

Provision for obsolete inventory

 

12

 

9

 

Bad debt expense

 

3

 

4

 

Share-based compensation

 

137

 

69

 

Changes in assets and liabilities:

 

 

 

 

 

Accounts receivable

 

1,132

 

(558

)

Inventories

 

(558

)

(409

)

Prepaid expenses and other current assets

 

(6

)

(67

)

Accounts payable

 

(60

)

43

 

Accrued expenses

 

(239

)

109

 

Customer advances

 

(342

)

144

 

Net cash flows used in operating activities

 

(363

)

(280

)

 

 

 

 

 

 

Cash flows from investing activities:

 

 

 

 

 

Purchase of property, plant and equipment

 

(113

)

(23

)

Net cash flows used in investing activities

 

(113

)

(23

)

 

 

 

 

 

 

Cash flows from financing activities:

 

 

 

 

 

Principal repayments on long-term debt and obligations under capital leases

 

(130

)

(145

)

Net proceeds from issuance of common stock

 

68

 

38

 

Net cash flows used in financing activities

 

(62

)

(107

)

Net change in cash and cash equivalents

 

(538

)

(410

)

Cash and cash equivalents at beginning of period

 

1,860

 

1,452

 

Cash and cash equivalents at end of period

 

$

1,322

 

$

1,042

 

 

See notes to unaudited condensed consolidated financial statements.

5




MFIC CORPORATION

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS (Unaudited)

1.              Description of Business

MFIC Corporation (“MFIC” or the “Company”), through its wholly-owned subsidiary, Microfluidics Corporation (“Microfluidics”), operates in one segment, producing and marketing a broad line of proprietary high-shear fluid processing systems used primarily in the pharmaceutical, biotechnology,  food, chemical and personal care industries.

The condensed consolidated financial statements include the accounts of the Company and its wholly-owned subsidiary, Microfluidics.  All intercompany balances and transactions have been eliminated.

The Company’s corporate headquarters and manufacturing operations are located in Newton, Massachusetts.

Certain accounts in the condensed consolidated financial statements and related notes have been reclassified to conform to current period presentation.

2.              Interim Financial Statements

The condensed consolidated financial information for the three and six months ended June 30, 2007 is unaudited but includes all adjustments (consisting only of normal recurring adjustments) that the Company considers necessary for a fair presentation of the financial position at such date and of the operating results and cash flows for the period.  The results of operations for the three and six months ended June 30, 2007 are not necessarily indicative of results that may be expected for the entire year.  The information contained in this Form 10-Q should be read in conjunction with the Company’s audited financial statements, included in its Annual Report on Form 10-K as of and for the year ended December 31, 2006 filed with the Securities and Exchange Commission (“SEC”).

The balance sheet as of December 31, 2006 has been derived from our audited consolidated financial statements at that date but does not include all of the information and footnotes required by generally accepted accounting principles for complete financial statements.

3.              Significant Accounting Policies

The significant accounting policies followed by the Company and its subsidiary in preparing its unaudited condensed consolidated financial statements are set forth in Note 1 to the consolidated financial statements included in the Company’s Annual Report on Form 10-K for the year ended December 31, 2006, filed with the SEC.

4.              Revenue Recognition

Revenue from the sale of machines and spare parts is generally recognized upon shipment of the product or when the earnings process is complete.  Rental income for the lease of equipment is recognized on a straight-line basis over the term of the lease agreement.  Rental income and equipment sales are classified in revenues in the consolidated statement of operations.

The Company has adopted Securities and Exchange Commission (SEC) Staff Accounting Bulletin (SAB) No. 104, “Revenue Recognition in Financial Statements.  The Company recognizes sales at the time of shipment of the system to the customer.  Management believes the customer’s post-delivery acceptance provisions and installation are routine.  The Company has never failed to successfully complete a system installation.  With few exceptions, the Company limits its liability to the return of the equipment sold.  Installation costs are predictable and insignificant to the total purchase price.  The Company has demonstrated a history of customer acceptance subsequent to shipment and installation of these systems.

5.              Recent Accounting Pronouncements

In June 2006, the Financial Accounting Standards Board (“FASB”) issued FASB Interpretation No. 48, “Accounting for Uncertainty in Income Taxes,” an interpretation of FASB Statement No. 109 (“FIN 48”).  FIN 48 clarifies the accounting for uncertainties in income taxes recognized in an enterprise’s financial statements.  The Interpretation requires that we determine whether it is more likely than not that a tax position will be sustained upon examination by the appropriate taxing authority.  If a tax position meets the more likely than not recognition criteria, FIN 48 requires the tax position be measured at the largest amount of benefit greater than fifty percent (50%) likely of being realized upon ultimate settlement.  This accounting standard is effective for fiscal years beginning after December 15, 2006.  Effective January 1, 2007, the Company adopted FIN 48.  Management does not believe the adoption of FIN 48 will have a material affect on our financial position and results of operations.

In September 2006, the SEC issued Staff Accounting Bulletin No. 108 (“SAB 108”), “Considering the Effects of Prior Year Misstatements When Quantifying Misstatements in Current Year Financial Statements.”  SAB 108 expresses SEC staff views regarding the process by which misstatements in financial statements are evaluated for purposes of determining whether those misstatements are material to a company’s financial statements.  The provisions of SAB 108 are effective for fiscal years ending on or after November 15, 2006.  Our adoption of the provisions of SAB 108 did not have any material impact on our results of operations, financial position or cash flows.

6




6.              Stock Based Compensation

In December 2004, the FASB issued SFAS No. 123R, Share-Based Payment—An Amendment of FASB Statements No. 123 and 95,” which requires all companies to measure compensation cost for all share-based payments, including employee stock options, at fair value.  Generally, the approach in SFAS No. 123R is similar to the approach described in SFAS No. 123, Accounting for Stock-Based Compensation.”  However, SFAS No. 123R requires all share-based payments to employees, including grants of employee stock options, to be recognized in the financial statements based on their fair value over the requisite service period.  Pro forma disclosure is no longer an alternative.  In March 2005, the SEC issued Staff Accounting Bulletin (“SAB”) No. 107, which expressed the views of the SEC regarding the interaction between SFAS No. 123R and certain rules and regulations of the SEC.  SAB No. 107 provides guidance related to the valuation of share-based payment arrangements for public companies, including assumptions such as expected volatility and expected term.

Prior to January 1, 2006, the Company applied the pro forma disclosure requirements under SFAS No. 123 and accounted for its stock-based employee compensation plans using the intrinsic value method under the recognition and measurement provisions of Accounting Principles Board Opinion (“APB”) No. 25, Accounting for Stock Issued to Employees” and related interpretations.  Effective January 1, 2006, the Company adopted the fair value recognition provisions of SFAS No. 123R, using the modified prospective transition method.  Under this transition method, compensation cost recognized in the statement of operations for the year ended December 31, 2006 includes: (a) compensation cost for all share-based payments granted prior to, but not yet vested as of January 1, 2006, based on the grant-date fair value estimated in accordance with the original provisions of SFAS No. 123; and (b) compensation cost for all share-based payments granted, modified or settled subsequent to January 1, 2006, based on the grant-date fair value estimated in accordance with the provisions of SFAS No. 123R.  In accordance with the modified prospective transition method, results for prior periods have not been restated.

For the three month periods ended June 30, 2007 and 2006, the Company recognized stock-based employee compensation expense of $99,000 and $32,000, respectively.  For the six month periods ended June 30, 2007 and 2006, the Company recognized stock-based employee compensation expense of $137,000 and $69,000, respectively.  Stock-based employee compensation expense for the three and six month periods ended June 30, 2007 is included in General and Administrative expense of the unaudited condensed consolidated statement of operations, and includes $61,000 of compensation expense attributed to the exercise of stock options by the Company’s former Chairman and CEO (See Note 12). The Company did not capitalize any stock-based compensation.  The Company has established a valuation allowance for net deferred tax assets, accordingly, no significant tax benefit on the stock-based compensation was recorded during the three and six month periods ended June 30, 2007 and 2006.

On December 31, 2005, upon recommendation of its Compensation Committee, the Company approved the accelerated vesting of all of the then outstanding unvested stock options (“Options”), pursuant to the Company’s 1988 Employee Stock Option Plan, to purchase 765,886 shares of common stock of the Company.  The decision to accelerate the vesting of these Options was made primarily to reduce non-cash compensation expense that would have been recorded in the Company’s income statement in the future periods upon the adoption of SFAS No. 123R on January 1, 2006.  Of the Options eligible for acceleration, Options to purchase 480,915 shares of the Company’s common stock became immediately exercisable on December 31, 2005.  The remaining terms for each of the Options granted remain the same.  With respect of the remaining Options to purchase 284,971 shares of the Company’s common stock approved for acceleration, the option holders exercised their “opt-out” rights to forego acceleration.

The Black-Scholes option valuation model was developed for use in estimating the fair value of traded options, which have no vesting restrictions and are fully transferable.  In addition, option valuation models require the input of highly subjective assumptions including the expected stock price volatility.  Because the Company’s employee stock options have characteristics significantly different from those of traded options, and because changes in the subjective input assumptions can materially affect the fair value estimate, in management’s opinion, the existing models do not necessarily provide a reliable single measure of the fair value of its employee stock options.

7




The fair value of each option granted during the three and six months ended June 30, 2007 and 2006 is estimated on the date of grant using the Black-Scholes option pricing model with the following weighted average assumptions:

 

Three Months Ended
June 30,

 

Six Months Ended
June 30,

 

 

 

2007

 

2006

 

2007

 

2006

 

Dividend yield

 

None

 

None

 

None

 

None

 

Expected volatility

 

115.00

 

126.00

 

115.00

 

120.00

 

Risk-free interest rate

 

4.54%

 

4.85%

 

4.54%

 

4.85%

 

Expected life

 

5.0 years

 

5.0 years

 

5.0 years

 

5.0 years

 

 

Dividend yield - The Company has never declared or paid any cash dividends on any of its capital stock and does not expect to do so in the foreseeable future.  Accordingly, the Company uses an expected dividend yield of zero to calculate the grant-date fair value of a stock option.

Expected volatility - The expected volatility is a measure of the amount by which the Company’s stock price is expected to fluctuate during the expected term of options granted.  The Company determines the expected volatility solely based upon the historical volatility of the Company’s Common Stock over a period commensurate with the option’s expected term.  The Company does not believe that the future volatility of its Common Stock over an option’s expected term is likely to differ significantly from the past.

Risk-free interest rate - The risk-free interest rate is the implied yield available on U.S. Treasury zero-coupon issues with a remaining term equal to the option’s expected term on the grant date.

Expected life - The expected life of options granted represents the period of time for which the options are expected to be outstanding and is derived from the Company’s historical stock option exercise experience and option expiration data.

Other reasonable assumptions about these factors could provide different estimates of fair value.  Future changes in stock price volatility, life of options, interest rates, forfeitures and dividend practices, if any, may require changes in our assumptions, which could materially affect the calculation of fair value.

There were no stock options granted during each of the three months ended June 30, 2007 and 2006.  The weighted average fair value of stock options granted during the six months ended June 30, 2007 and 2006 was $1.34 and $1.27 per share, respectively.  We estimate forfeitures related to option grants at an annual rate of 4% for 2007 and 9% for 2006.

Total unrecognized stock-based compensation expense related to unvested stock options, expected to be recognized over a weighted average period of 5 years, amounted to approximately $408,000 at June 30, 2007.

The Company has three (3) shareholder approved stock option plans (collectively, the “Stock Option Plans”) as follows:  (i) the 1988 Stock Plan, which authorized the grant of stock rights for up to 3,500,000 shares of common stock (the “1988 Plan”); (ii) the 1989 Non-Employee Director Stock Option Plan (the “1989 Plan”), which authorizes the grant of nonqualified stock options for up to 500,000 shares of common stock; and (iii) the 2006 Stock Plan (the “2006 Plan”) which authorizes the grant of stock rights for up to 4,000,000 shares of common stock, increased by the number of shares of common stock underlying unexercised options issued under either the 1988 Plan or the 1989 Plan (collectively referred to herein as the “Prior Plans”) that expired after June 20, 2006, and decreased by the number of shares of common stock issued and issuable pursuant to options outstanding under the Prior Plans.  The 2006 Plan was approved by our shareholders at the Annual Meeting of Shareholders held on June 20, 2006.  Upon adoption of the 2006 Plan by our shareholders, we ceased granting new options under the Prior Plans.  The Prior Plans permitted, and the 2006 Plan permits, the granting of stock awards to employees, officers, and non-employee members of the Board of Directors.  Options granted under the Prior Plans and the 2006 Plan permit vesting over a 3-to-5 year period and expire 5-to-10 years from the date of grant.  At June 30, 2007, approximately 705,000 shares were available for future grants under the 2006 Plan and no shares were available for future grants under the Prior Plans.

8




During the three months ended June 30, 2007 and 2006, the Company issued no stock options pursuant to either the 2006 Plan or Prior Plans.  During the six months ended June 30, 2007 and 2006, the Company issued 72,232 stock options, pursuant to the 2006 Plan, and 51,000 stock options, pursuant to the Prior Plans, respectively.  These stock options were granted at exercise prices equal to or greater than the fair market value of the Company’s common stock on the date of grant.  During the three months ended June 30, 2007, approximately 38,000 shares were forfeited.  During the three months ended June 30, 2006, there were no shares forfeited.  During the three months ended June 30, 2007 there were no shares vested under the 2006 Plan.  During the three months ended June 30, 2006, there were 15,000 shares vested under Prior Plans.  During the six months ended June 30, 2007 and 2006, approximately 48,000 shares and 34,000 shares, respectively, were forfeited; and approximately 88,000 shares and 151,000 shares were vested, respectively, under the 2006 Plan and Prior Plans, collectively.

Information regarding option activity for the six months ended June 30, 2007 under the Plan is summarized below:

 

Options
Outstanding

 

Weighted
Average Exercise
Price per Share

 

Weighted
Average
Remaining

Contractual

Term in Years

 

Options outstanding as of January 1, 2007

 

1,561,086

 

$

1.45

 

6.60

 

Granted

 

72,232

 

1.63

 

8.18

 

Exercised

 

(79,027

)

0.88

 

5.50

 

Cancelled

 

(47,879

)

1.70

 

5.17

 

Options outstanding as of June 30, 2007

 

1,506,412

 

1.48

 

5.99

 

Options exercisable as of June 30, 2007

 

1,282,686

 

1.39

 

5.85

 

 

On November 17, 2004, the Company entered into a general financial and advisory services agreement with Maxim Group LLC pursuant to which Maxim Group LLC was granted, on April, 1, 2005, a three-year warrant to purchase 100,000 shares of the Company’s common stock at an exercise price of $3.20 per share.  These warrants were issued pursuant to the exemption to the registration requirements of the Securities Act of 1933, as amended, available under Section 4(2) of that Act.  Maxim Group LLC was an “accredited investor” pursuant to the rules of the Securities and Exchange Commission.  The Company filed a registration statement on Form SB-2, which was declared effective on June 5, 2006, for purposes of registering the shares of common stock underlying the warrants.  Maxim Group LLC has waived its rights to receive, based upon the date that the registration statement on Form SB-2 was declared effective, an additional warrant to purchase shares of the Company’s common stock.  The warrants may be exercised in whole or in part at any time on or prior to April 1, 2008.  In addition, the warrants provide for certain adjustments to the exercise price upon the issuance by the Company of certain securities at a price below $3.20.  The estimated value of these warrants of $119,000 was amortized in full prior to January 1, 2006.

7.              Inventories

Inventories consist of the following:

(in thousands)

 

June 30,
2007

 

December 31,
2006

 

Raw materials

 

$

2,348

 

$

1,957

 

Work in progress

 

187

 

217

 

Finished goods

 

249

 

51

 

 

 

2,784

 

2,225

 

Less: provision for excess inventory

 

(212

)

(200

)

Total inventories

 

$

2,572

 

$

2,025

 

 

9




8.              Property, Plant and Equipment

Property, plant and equipment consists of the following:

(in thousands)

 

June 30,
2007

 

December 31,
2006

 

Furniture, fixtures and office equipment

 

$

638

 

$

546

 

Machinery, equipment and tooling

 

453

 

435

 

Leasehold improvements

 

97

 

94

 

 

 

1,188

 

1,075

 

Less: accumulated depreciation and amortization

 

(846

)

(772

)

 

 

$

342

 

$

303

 

 

For the three months ended June 30, 2007 and 2006, depreciation expense was approximately $37,000 and $45,000, respectively.  For the six months ended June 30, 2007 and 2006, depreciation expense was approximately $74,000 and $90,000, respectively.

9.              Accrued Expenses

Accrued expenses consist of the following:

(in thousands)

 

June 30,
2007

 

December 31,
2006

 

Accrued expenses

 

$

200

 

$

240

 

Accrued wages and vacation pay

 

111

 

256

 

Accrued commissions

 

243

 

248

 

Accrued warranty

 

61

 

74

 

 

 

$

615

 

$

818

 

 

10.       Earnings Per Share

Basic net (loss) income per common share was determined by dividing net (loss) income applicable to common stockholders by the weighted average number of common shares outstanding during the period.  Diluted net (loss) income per share reflects the potential dilution that could occur if securities or other contracts to issue common stock were exercised or converted into common stock or resulted in the issuance of common stock, unless the effects of dilution would be anti-dilutive.

 

Three Months Ended
June 30,

 

Six Months Ended
June 30,

 

(in thousands)

 

2007

 

2006

 

2007

 

2006

 

Shares for computation of basic net (loss) income per share

 

10,180

 

9,974

 

10,152

 

9,963

 

Effect of dilutive stock options and warrants

 

 

1,016

 

 

1,075

 

Shares for computation of diluted net (loss) income per share

 

10,180

 

10,990

 

10,152

 

11,038

 

 

11.       Industry Segment, Geographic and Enterprise-Wide Information

SFAS No. 131, “Disclosures about Segments of an Enterprise and Related Information,” requires companies to report selected information about operating segments, as well as enterprise-wide disclosures about products, services, geographic areas and major customers.  Operating segments are determined based on the way management organizes its business for making operating decisions and assessing performance.  The Company’s chief decision-maker, as defined under SFAS No. 131, is the chairman and chief executive officer.  The Company has determined that it conducts its operations in one business segment: the development, manufacture, marketing and sale of process and formulation equipment.  The Company’s sales are primarily to companies with processing needs in the chemical, pharmaceutical, food, cosmetic, and biotechnology industries.  The Company has less than 1% of total

10




assets in foreign countries.  As a result, the financial information disclosed herein represents all of the material financial information related to the Company’s principal operating segment.

Approximate sales to customers by geographic markets, and percentage of total sales by geographic market, are as follows:

 

Three Months Ended
June 30,

 

Six Months Ended
June 30,

 

(in thousands)

 

2007

 

2006

 

2007

 

2006

 

North America

 

$

2,011

 

56.5

%

$

2,127

 

54.4

%

$

3,718

 

58.5

%

$

3,616

 

51.2

%

Asia

 

604

 

17.0

%

898

 

23.0

%

1,034

 

16.2

%

1,972

 

27.9

%

Europe

 

942

 

26.5

%

885

 

22.6

%

1,606

 

25.3

%

1,473

 

20.9

%

 

 

$

3,557

 

100.0

%

$

3,910

 

100.0

%

$

6,358

 

100.0

%

$

7,061

 

100.0

%

 

The Company’s sales in North America include the United States, Canada and Mexico.

The users of the Company’s systems are in various industries, including the chemical, pharmaceuticals, food,  personal care products, and biotechnology industries.  Mizuho Industrial Co. Ltd. (Mizuho), Teva Pharmaceuticals Industries Ltd. (Teva) and its wholly-owned subsidiary, and Inland Machinery accounted for 4.1%, 1.4% and 0.4%, respectively, of the Company’s revenues in the three months ended June 30, 2007; and 13.7%, 11.5% and 12.8%, respectively, of the Company’s revenues in the three months ended June 30, 2006.  Mizuho Industrial Co. Ltd. (Mizuho), Teva Pharmaceuticals Industries Ltd. (Teva) and its wholly-owned subsidiary, and Inland Machinery accounted for 5.4%, 8.4% and 2.2%, respectively, of the Company’s revenues in the six months ended June 30, 2007; and 15.3%, 13.4% and 8.8%, respectively, of the Company’s revenues in the six months ended June 30, 2006.  Mizuho, the Company’s Japanese distributor of Microfluidizer processor equipment and spare parts, resells the Company’s equipment to numerous end-users in Japan, none of which individually represents 10% or more of the Company’s revenues during the three and six month periods ended June 30, 2007 and 2006.

Two customers accounted for 12.7% and 8.3%, respectively, of the trade accounts receivable as of June 30, 2007.

A reduction or delay in orders from any of the Company’s significant customers could have a material adverse effect on the Company’s results of operations.

12.       Stockholders’ Equity

During the three months ended June 30, 2007 and 2006, the Company issued 10,000 and 21,000 shares, respectively, of common stock as a result of the exercise of options by employees and directors, generating cash proceeds of approximately $13,000 and $10,000, respectively.  During the six months ended June 30, 2007 and 2006, the Company issued 42,450 and 54,025 shares, respectively, of common stock as a result of the exercise of options by employees and directors, generating cash proceeds of approximately $49,000 and $22,000, respectively.

Although the Stock Option Plans do not specifically provide for cashless exercise, the administrator of the Stock Option Plans allowed the former Chairman and CEO during the three months ended June 30, 2007 and a former director during the three months ended March 31, 2006, to transact a cashless exercise of stock options granted.  The cashless exercise allows the former employee/director to not tender any cash or shares in an option exercise.  Rather, the employer withholds the number of shares with a fair value equal to the option exercise price from shares that would otherwise be issued upon exercise.

During the three and six months ended June 30, 2007, the Company issued 36,577 shares of common stock pursuant to the cashless exercise of options granted for the exercise of 50,000 shares of the Company’s common stock.  During the three and six months ended June 30, 2006, the Company issued 10,548 shares of common stock pursuant to the Cashless Exercise of options granted for the exercise of 15,000 shares of the Company’s common stock.  Since the Stock Option Plans does not provide for a cashless exercise, the transactions are considered a modification of the respective stock option agreements entered into with the former Chairman and CEO and former director.  Accordingly, for the three and six months ended June 30, 2007, the Company recorded

11




compensation expense of  approximately $61,000.  For the three and six months ended June 30, 2006, the Company recorded compensation expense of approximately $5,000.  Compensation expense for these periods was charged to General and Administrative expense in the condensed consolidated statements of operations.

During each of the three months ended June 30, 2007 and 2006, the Company issued no shares of common stock as a result of the purchase of shares under the Employee Stock Purchase Plan.  During the six months ended June 30, 2007 and 2006, the Company issued 15,353 and 14,288 shares, respectively, of common stock as a result of the purchase of shares under the Employee Stock Purchase Plan, generating cash proceeds of approximately $18,000 and $16,000, respectively.

13.       Credit Facility

On March 1, 2004, the Company and its Microfluidics Corporation subsidiary, as co-borrowers, entered into a revolving credit and term loan agreement with Banknorth, N.A. (the “Lender”) providing the Company with a $2,000,000 demand revolving credit and four year term loan facility (the “Credit Facility”).  The Credit Facility was comprised of (i) a $1,000,000 demand revolving line of credit (the “Revolving Credit Line”), and (ii) a $1,000,000 four year term promissory note (the “Term Loan”).  The Revolving Credit Line obtains advances thereunder bearing interest at a rate equal to the prime rate (8.25% at June 30, 2007).  All borrowings under the Revolving Credit Line were evidenced by a $1,000,000 demand promissory note (the “Revolving Note”), and (ii) a $1,000,000 term promissory note, amortized over a four year period but having a maturity date of March 3, 2008 and bearing interest at a rate equal to 5.67%.  Loans under the Credit Facility are secured by a collateral pledge to the Lender of substantially all the assets of the Company and its subsidiaries.  The Company’s Microfluidics Corporation subsidiary guaranteed the Company’s obligations to the Lender under the Credit Facility.  The Company also pledged to the Lender all shares of Microfluidics Corporation owned by the Company.  The Company is required to meet two covenants on an annual (calendar) basis as of December 31 of a given year as follows: (i) the Company’s senior debt may not be more than four times the amount of its tangible capital base, and (ii) its debt service coverage ratio may not be less than 1.20 to 1.  On November 20, 2006 the Company and the lender agreed to a modification of the definition of the Debt Service Coverage Ratio.  The purpose of the modification was to eliminate significant non-cash items, such as stock-based employee compensation expense, from affecting the ratio.  At December 31, 2006, the Company was in compliance with the debt covenants.

Due to the subjective acceleration clause and the lock-box arrangement with the Lender, any amount outstanding on the Revolving Credit Line would be classified as a current liability in the condensed consolidated balance sheet.  As of June 30, 2007, there was no outstanding balance on the Revolving Credit Line.  As of June 30, 2007, the balance outstanding on the Term Loan was approximately $188,000.

14.       Long-Term Debt

Long-term debt as of the following dates consisted of:

(in thousands)

 

June 30,
2007

 

December 31,
2006

 

Term note

 

$

188

 

$

312

 

Capital leases payable

 

7

 

12

 

 

 

195

 

324

 

Less: current portion

 

(195

)

(259

)

Long-term debt, net of current portion

 

$

 

$

65

 

 

Obligations under capital leases consist of two (2) capitalized leases with bargain purchase options that the Company is obligated to pay over a two (2) year period.

15.       Income Taxes

The Company provides for income taxes at the end of each interim period based on the estimated effective tax rate for the full fiscal year. Cumulative adjustments to the tax provision are recorded in the interim period in which a change in the estimated annual effective rate is determined.   The effective tax rate calculation includes determining both the current and deferred income tax expense as well as accounting for the differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax basis.  The future tax consequences attributable to these differences result in deferred tax assets and liabilities, which are included on our consolidated balance sheets.  We must assess the recoverability of the deferred tax assets by considering the circumstances upon which it

12




is “more likely than not” that some portion or all of the deferred tax assets will be realized. Circumstances upon which it would be more likely than not that an adjustment is warranted includes significant changes in estimated future profitability. To the extent we believe that recovery does not meet this “more likely than not” standard as required in SFAS No. 109,  Accounting for Income Taxes , we must establish a valuation allowance.  Changes in the valuation allowance are reflected in determining the effective tax rate for the year.

13




Item 2.                       Management’s Discussion and Analysis of Financial Condition and Results of Operations

Future Operating Results

This report may contain forward-looking statements that are subject to certain risks and uncertainties including statements relating to the Company’s plan to achieve, maintain, and/or increase revenue growth, and/or operating profitability, and to achieve, maintain, and/or increase net operating profitability.  Such statements are based on the Company’s current expectations and are subject to a number of factors and uncertainties that could cause actual results achieved by the Company to differ materially from those described in the forward-looking statements.  The Company cautions investors that there can be no assurance that the actual results or business conditions will not differ materially from those projected or suggested in such forward-looking statements as a result of various factors, including but not limited to, the following risks and uncertainties: (i) whether the performance advantages of the Company’s Microfluidizer® materials processing equipment will be realized commercially or that a commercial market for the equipment will continue to develop, (ii) whether the timing of orders will significantly affect quarter to quarter revenues and resulting net income results for a particular quarter, which may cause increased volatility in the Company’s stock price, (iii) whether the Company will have access to sufficient working capital through continued and improving cash flow from sales and ongoing borrowing availability, the latter being subject to the Company’s ability to maintain compliance with the covenants and terms of the Company’s loan agreement with its senior lender, (iv) whether the Company’s technology will be adopted by customers as a means of producing MMR (defined below) innovative materials in large quantities, (v) whether the Company is able to deploy prototype MMR placements and then manufacture and introduce commercial production MMR equipment, (vi) whether the Company will achieve a greater proportion of its sales in the future through the sale of advanced processor production systems, and (vii) as well as those risks set forth in Item 1a, “Risk Factors,” in the Company’s Annual Report on Form 10K for the year ended December 31, 2006.  The Company assumes no responsibility to update any forward-looking statements as a result of new information, future events, or otherwise.

Overview

MFIC Corporation (“MFIC” or the “Company”) has, for over 20 years, specialized in the design, manufacturing and marketing of a broad line of high shear fluid processing systems used in numerous applications in the chemical, pharmaceutical, biotech, food and  personal care industries.

MFIC’s line of high shear fluid processor equipment, marketed under the Company’s Microfluidizer trademark and trade name, process premixed formulations to produce small uniform structures, usually of the submicron and nanoscale size (commonly defined as particles having dimensions less than 100 nanometers) including nanostructures, microemulsions and nanosuspensions.  The equipment produces commercial quantities of such materials important to producers of pharmaceuticals, coatings and other products.  Further, the Company guarantees scaleup of formulations and results on its processor equipment from approximately 100 milliliters per minute on its laboratory and bench top models up to  15 gallons per minute on its pilot and production models.

The Company’s technology embodied within its Microfluidizer high shear fluid processor is used for formulation of products that are normally very difficult to mix and stabilize.  Microfluidizer processors through process intensification allow manufacturers in the chemical, pharmaceutical, cosmetic, and food processing industries to produce higher quality products with better characteristics on a more consistent basis than with other commercially available blending, mixing or homogenizing techniques. Additionally, the equipment is used for cell disruption to harvest the cultivated contents of bacterial, yeast, mammalian and/or plant cells and for liposomal encapsulation of materials for the cosmetics and biotech/biopharma industries.

The Company has begun to take steps toward commercializing its proprietary equipment, processes and technology for the continuous production of precipitated submicron or nanoscale particles by interaction of discrete streams of reacting materials, through a novel adaptation of its Microfluidizer processor equipment that permits the mixing of, and reactions between, streams of different solutions at high pressures.  The Company refers to this technology as a Multiple Stream High Pressure Mixer/Reactor (MMR).  In August 1997, the Company filed a patent application for the device and its processes with the United States Patent and Trademark Office (USPTO), and filed a Patent Cooperation Treaty (PCT) application on May 5, 1998.  In July and November 2000, the USPTO issued to the Company notices of allowances of utility patent claims regarding the MMR and the use thereof.  On September 18, 2002, the European Patent Office advised the Company it would grant its MMR patent substantially as applied for, including its device and process claims.  The Company has gained national entry of the patent in France, Germany, Italy, The Netherlands, and the United Kingdom.  The Company is still prosecuting the allowance of the patent in Canada.  The Company’s management believes that future commercialization and growth of

14




nanotechnology may be, in large part, enabled by the manufacturing capability of the Company’s materials processor and MMR equipment.

The Company was incorporated in Delaware in 1983. The Company, formerly named Biotechnology Development Corporation, changed its name effective June 8, 1993 to Microfluidics International Corporation, and again changed its name effective July 12, 1999 to MFIC Corporation. From August, 1998 until its sale on February 9, 2004, the Company also operated another division, known as the Morehouse-COWLES Division, which manufactured and sold a broad line of mechanical fluid materials processing systems used for a variety of dispersing, milling, and mixing applications across a variety of industries. The Company’s principal executive offices are located at 30 Ossipee Road, in Newton, Massachusetts 02464-9101 and its telephone number is (617) 969-5452.

Critical Accounting Policies

Our significant accounting policies are summarized in Note 1 to our consolidated financial statements included in Item 8 of our Annual Report on Form 10-K for the period ended December 31, 2006.  However, certain of our accounting policies require the application of significant judgment by our management, and such judgments are reflected in the amounts reported in our consolidated financial statements.  In applying these policies, our management uses its judgment to determine the appropriate assumptions to be used in the determination of estimates.  Those estimates are based on our historical experience, terms of existing contracts, our observance of market trends, information provided by our strategic partners and information available from other outside sources, as appropriate.  Actual results may differ significantly from the estimates contained in our consolidated financial statements.  There has been no change to our critical accounting policies through the quarter ended June 30, 2007.  Our critical accounting policies are as follows:

·       Revenue Recognition.  The Company recognizes revenue in accordance with Staff Accounting Bulletin (“SAB”) No. 104, “Revenue Recognition in Financial Statements.”  The Company recognizes revenue from product sales upon shipment, provided that a purchase order has been received or a contract has been executed, there are no uncertainties regarding customer acceptance, the sales price is fixed or determinable and collection is deemed probable.  If uncertainties regarding customer acceptance exist, the Company recognizes revenue when those uncertainties are resolved and title has been transferred to the customer.  Amounts collected or billed prior to satisfying the above revenue recognition criteria are recorded as deferred revenue.

·       Accounts Receivable Valuation.  We perform various analyses to evaluate accounts receivable balances and record an allowance for bad debts based on the estimated collectibility of the accounts such that the amounts reflect estimated net realizable value.  If actual uncollectible amounts significantly exceed the estimated allowance, the Company’s operating results would be significantly and adversely affected.

·        Inventory Valuation.  We value our inventory at the lower of our actual cost or the current estimated market value.  We regularly review inventory quantities on hand and inventory commitments with suppliers and record a provision for excess and obsolete inventory based primarily on our historical usage for the prior twenty-four month period.  Although we make every effort to ensure the accuracy of our forecasts of future product demand, any significant unanticipated change in demand or technological developments could have a significant impact on the value of our inventory and our reported operating results.

·        Product Warranties.  Our products are generally sold with a twelve month warranty provision that requires us to remedy deficiencies in quality or performance of our products at no cost to our customers only after it has been determined that the cause of the deficiency is not due to the actions of the machine operator or product used in the machine.  The Company has established a policy for replacing parts that wear out or break prematurely.  The policy called for replacing the parts or repairing a machine within one year of the sale.  Commencing in May of 2006, the Company altered its warranty by limiting to a period of 90 days its warranty coverage on certain critical wear items.  The Company is now selling more advanced processor production systems than past years that may require more costly parts.  As of June 30, 2007 the Company has a reserve balance for product warranties in the approximate amount of $61,000, which we believe is adequate.

·        Stock-Based Compensation.   Effective January 1, 2006, we adopted Statement of Financial Accounting Standard No. 123R (SFAS 123R), “Share-Based Payment, which requires the expense recognition of the estimated fair value of all stock-based payments issued to employees.  Prior to the adoption of SFAS 123R,

15




the estimated fair value associated with such awards was not recorded as an expense, but rather was disclosed in a footnote to our financial statements.

The valuation of employee stock options is an inherently subjective process, since market values are generally not available for long-term, non-transferable employee stock options.  Accordingly, an option pricing model is utilized to derive an estimated fair value.  In calculating the estimated fair value of our stock options we use the Black-Scholes pricing model, which requires the consideration of the following six variables for purposes of estimating fair value:

·                   the stock option exercise price,

·                   the expected term of the option,

·                   the grant price of our common stock, which is issuable upon exercise of the option,

·                   the expected volatility of our common stock,

·                   the expected dividends on our common stock (we do not anticipate paying dividends in the foreseeable future), and

·                   the risk free interest rate for the expected option term.

Stock Option Exercise Price and Grant Date Price of our Common Stock.  The closing market price of our common stock on the date of grant.

Expected Term.  For option grants subsequent to the adoption of SFAS 123R, the expected life of stock options granted is based on the simplified method prescribed under SAB 107, “Share-Based Payment.”  Accordingly, the expected term is presumed to be the midpoint between the vesting date and the end of the contractual term.

Expected Volatility.  The expected volatility is a measure of the amount by which our stock price is expected to fluctuate during the expected term of options granted.  We determine the expected volatility solely based upon the historical volatility of our common stock over a period commensurate with the option’s expected term.  We do not believe that the future volatility of our common stock over an option’s expected term is likely to differ significantly from the past.

Expected Dividends.  We have never declared or paid any cash dividends on any of our capital stock and do not expect to do so in the foreseeable future.  Accordingly, we use an expected dividend yield of zero to calculate the grant-date fair value of a stock option.

Risk-Free Interest Rate.  The risk-free interest rate is the implied yield available on U.S. Treasury zero-coupon issues with a remaining term equal to the option’s expected term on the grant date.

Of the variables above, the selection of an expected term and expected stock price volatility are the most subjective.

Upon adoption of SFAS 123R, we were also required to estimate the level of award forfeitures expected to occur and record compensation expense only for those awards that are ultimately expected to vest.  This requirement applies to all awards that are not yet vested, including awards granted prior to January 1, 2006.  The Company will revisit this assumption periodically and as changes in the composition of our option pool dictate.

Changes in the inputs and assumptions, as described above, can materially affect the measure of estimated fair value of our share-based compensation.  The Company anticipates the amount of stock-based compensation to increase in the future as additional options are granted.

16




Results of Operations

Three Months Ended June 30, 2007 vs. June 30, 2006

Revenues

Total revenues for the three months ended June 30, 2007 were approximately $3,557,000, as compared to revenues of $3,910,000 for the comparable prior year period, a decrease of approximately $353,000, or 9.0%.

North American sales for the three months ended June 30, 2007 decreased to approximately $2,011,000, a 5.5% decrease, as compared to sales of approximately $2,127,000 for the three months ended June 30, 2006.  The decrease in North American sales was principally due to a  decrease in the sale of spare parts of approximately $127,000; offset in part by an increase in the sale of machines of $11,000.  Foreign sales were approximately $1,546,000 for the three months ended June 30, 2007, compared to $1,783,000 for the three months ended June 30, 2006, a decrease of $237,000, or 13.3%.  The decrease in foreign sales was principally due to a decrease in the sale of machines of approximately $119,000 and a decrease in the sale of spare parts of approximately $118,000.  The overall decrease in sales of spare parts was largely attributable to a rescheduling of deliveries of orders from a customer (the “Customer”) that uses our equipment to provide outsourced processing of products for pharmaceutical companies.  During the quarter ended June 30, 2007, the Customer notified us of that it was rescheduling the spare parts delivery schedule under an existing supply order due to changes in their production schedule.  As a result of this rescheduling, there was a reduction in spare parts purchases by the Customer of approximately $430,000 for the quarter ended June 30, 2007and lengthened the shipping schedule from its’ original conclusion date in December,2007 to a new conclusion date in June, 2008.

Cost of Sales

Cost of sales for the three months ended June 30, 2007 was approximately $1,453,000, or 40.9% of revenue, compared to $1,801,000, or 46.1% of revenue, for the comparable prior year period.  The decrease in cost of sales in absolute dollars for the three months ended June 30, 2007, reflects the overall decrease in sales.  The Company’s major product lines have different profit margins, as well as multiple profit margins within each product line.  The decrease in cost of sales as a percentage of sales is primarily attributable to i) a decrease in the percentage of total sales by our distributors in Canada and Japan who purchase machines and spare parts from the Company at a discount, and ii) an increase in the average sales price per unit compared to the three months ended June 30, 2006.

Research and Development Expenses

Research and development expenses for the three months ended June 30, 2007 were approximately $438,000, compared to $453,000 for the comparable prior year period, a decrease of approximately $15,000, or 3.3%.  The decrease in research and development expenses was primarily due to a decrease in test supplies of approximately $18,000, partially offset by planned increases in payroll and related costs of approximately $10,000.

Selling Expenses

Selling expenses for the three months ended June 30, 2007 were approximately $984,000, compared to $741,000 for the comparable prior year period, an increase of $243,000, or 32.8%.  The increase is primarily attributable to an increase in commission expense of approximately $120,000, a planned increase in payroll and related costs of approximately $54,000, and an increase in advertising costs of approximately $48,000.  The significant increase in commission expense results from an increase in the percentage of sales by commissioned direct sales personnel and indirect sales representatives, with a decrease in non-commissionable sales, primarily to our distributors in Canada and Japan.

General and Administrative Expenses

General and administrative expenses for the three months ended June 30, 2007, were approximately $805,000, compared to $701,000 for the comparable prior year period, an increase of $104,000, or 14.8%.  The increase in general and administrative expenses is principally due to i) an increase in public relations costs of approximately $16,000, and ii) recruiting fees of approximately $24,000 incurred in connection with the ongoing search for a chief executive officer, and an increase in corporate expense of approximately $47,000 primarily due to non-cash share based compensation expense.

Interest Income and Expense

Interest expense for the three months ended June 30, 2007 was approximately $1,000 compared to $10,000 for the comparable prior year period, a decrease of approximately $9,000.

Interest income for the three months ended June 30, 2007 was approximately $17,000 compared to $10,000 for

17




the comparable prior year period, an increase of $7,000.  The increase is due to an increase in cash available for investment, principally from the collection of trade receivables.

Income Tax Provision

For the three months ended June 30, 2007, the Company recognized no tax benefit due to the loss from operations.  For the three months ended June 30, 2006, the Company recognized a tax provision of $86,000 at the Company’s expected annualized effective tax rate of approximately 40%. (See Note 15 to Condensed Consolidated Financial Statements).

Six Months Ended June 30, 2007 vs. June 30, 2006

Revenues

Total revenues for the six months ended June 30, 2007 were approximately $6,358,000, as compared to revenues of $7,061,000 for the comparable prior year period, a decrease of approximately $703,000, or 10.0%.

North American sales for the six months ended June 30, 2007 increased to approximately $3,718,000, a 2.8% increase, as compared to sales of approximately $3,616,000 for the six months ended June 30, 2006.  The increase in North American sales was principally due to an increase in the sale of machines of approximately $140,000 and a decrease in the sale of spare parts of approximately $38,000.  Foreign sales were approximately $2,640,000 for the six months ended June 30, 2007, compared to $3,445,000 for the six months ended June 30, 2006, a decrease of $805,000, or 23.4%.  The decrease in foreign sales was principally due to a decrease in the sale of machines of approximately $414,000, primarily from our distributor in Japan, and a decrease in the sale of spare parts of approximately $391,000.  The overall decrease in sales of spare parts was largely attributable to a rescheduling of the shipment schedule for spare parts under an existing supply order  from a customer (the “Customer”). As part of a modification of its spare part supply order the Customer rescheduled shipments under an existing supply order.  During the six months ended June 30, 2007, the Customer notified us that it was rescheduling the spare parts delivery schedule under an existing supply order and lengthening the shipping schedule from its’ original conclusion date in December 2007 to a new conclusion date in June,2008..  As a result, there was a reduction in spare parts purchases from the Customer of approximately $430,000 for the six months ended June 30, 2007.

Cost of Sales

Cost of sales for the six months ended June 30, 2007 was approximately $2,646,000, or 41.6% of revenue, compared to $3,248,000, or 46.0% of revenue, for the comparable prior year period.  The decrease in cost of sales in absolute dollars for the six months ended June 30, 2007, reflects the overall decrease in sales.  The Company’s major product lines have different profit margins, as well as multiple profit margins within each product line.  The decrease in cost of sales as a percentage of sales is primarily attributable to i) a decrease in sales by our distributors in Canada and Japan who purchase machines and spare parts from the Company at a discount and ii) an increase in the average sales price per unit compared to the six months ended June 30, 2006.

Research and Development Expenses

Research and development expenses for the six months ended June 30, 2007 were approximately $974,000, compared to $850,000 for the comparable prior year period, an increase of approximately $124,000, or 14.6%.  The increase in research and development expenses was primarily due to i) planned increases in payroll and related costs of approximately $80,000, ii) development costs related to product enhancements of approximately $51,000, and consultant costs of approximately $25,000.  These increases were partially offset by a reduction in test supplies of approximately $20,000.

Selling Expenses

Selling expenses for the six months ended June 30, 2007 were approximately $1,808,000, compared to $1,357,000 for the comparable prior year period, an increase of $451,000, or 33.2%.  The increase is primarily attributable to an increase in commission expense of approximately $169,000, an increase in payroll and related costs of approximately $149,000, an increase in advertising expenses of approximately $51,000, and an increase in travel and entertainment costs of approximately $29,000.  The significant increase in commission expense results from an increase in the sale of machines and spare parts by commissioned direct sales personnel and indirect sales representatives, with a decrease in non-commissionable sales, primarily to our distributors in Canada and Japan.

General and Administrative Expenses

General and administrative expenses for the six months ended June 30, 2007, were approximately $1,483,000, compared to $1,323,000 for the comparable prior year period, an increase of $160,000, or 12.1%.  The increase in

18




general and administrative expenses is principally due to i.) an increase in corporate expense of approximately $54,000 primarily due to non-cash share based compensation expense.,   ii) an increase in consultant costs related to compliance with Sarbanes Oxley of approximately $34,000, iii) an increase in occupancy costs of approximately $30,000, iv) an increase in public relations costs of approximately $33,000, v) recruiting fees of approximately $24,000 incurred in connection with the ongoing search for a chief executive officer, and vi) an increase in planned payroll and related costs of approximately $13,000.  These increases were partially offset by a decrease in professional fees of approximately $40,000 due primarily to the absence of costs related to filing of a registration statement which were incurred during the three months ended March 31, 2006.

Interest Income and Expense

Interest expense for the six months ended June 30, 2007 was approximately $9,000 compared to $20,000 for the comparable prior year period, a decrease of approximately $11,000.

Interest income for the six months ended June 30, 2007 was approximately $38,000 compared to $20,000 for the comparable prior year period, an increase of $18,000.  The increase is due to an increase in cash available for investment, principally from the collection of trade receivables.

Income Tax Provision

For the six months ended June 30, 2007, the Company recognized no tax benefit due to the loss from operations.  For the six months ended June 30, 2006, the Company recognized a tax provision of $113,000 at the Company’s expected annualized effective tax rate of approximately 40%. (See Note 15 to Condensed Consolidated Financial Statements).

Liquidity and Capital Resources

As of June 30, 2007, the Company had approximately $1,322,000 in cash and cash equivalents, compared to $1,860,000 as of December 31, 2006.  The Company used cash of $363,000 and $280,000 from operations for the six months ended June 30, 2007 and 2006, respectively.  For the six months ended June 30, 2007, the Company generated cash by a decrease in trade accounts receivables, partially offset by the loss from operations, an increase in inventories, prepaid expenses and other assets, and a decrease in current liabilities.  The increase in inventories was primarily a result of a delay in shipment of spare parts to the Customer previously mentioned above.  For the six months ended June 30, 2006, the Company’s principal operating cash requirements were to fund i) increased trade receivables arising from increased sales, and ii) increased inventories required for production; offset by i) income from operations and ii) decreased current liabilities.

The Company used cash of $113,000 and $23,000 for investing activities for the six months ended June 30, 2007 and 2006, respectively, primarily for the purchase of capital equipment.

The Company used cash of $62,000 and $107,000 for financing activities for the six months ended June 30, 2007 and 2006, respectively.  Net cash used for financing activities for the six months ended June 30, 2007 and 2006 were for principal payments on the term loan and capital equipment loans, partially offset by proceeds from the issuance of common stock for options exercised and proceeds from stock issued from the employee stock purchase plan.

As of June 30, 2007, the Company maintains a revolving credit and term loan agreement (the “Credit Facility”) with Banknorth, N.A., providing the Company with a $1,000,000, four-year revolving credit line and a $1,000,000 four-year term loan facility. As of June 30, 2007, there was no balance due under its revolving credit line and a balance of $188,000 under its term loan facility.

During the three and six months ended June 30, 2007, the Company experienced net losses of $107,000 and $524,000, respectively.  Should the Company continue to experience losses, management is confident that the Company’s business plan and operations could be modified such that positive cash flows could be achieved.  Management believes these mitigating actions, combined with the Company’s cash balance of $1,322,000 at June 30, 2007 and available credit facility of $1,000,000, would be adequate to accommodate its working capital requirements for the next twelve months.

The Company’s contractual obligations as of June 30, 2007 are as follows:

(in thousands)

 

Total as of
June 30, 2007

 

Payable
During
Remainder
of 2007

 

Payable in
2008

 

Payable in
2009

 

Term note

 

$

188

 

$

126

 

$

62

 

$

 

Operating leases

 

1,052

 

210

 

421

 

421

 

Capital leases

 

7

 

4

 

3

 

 

 

 

$

1,247

 

$

340

 

$

486

 

$

421

 

 

Assuming that there is no significant change in the Company’s business, the Company believes that cash flows

19




from operations, together with the Credit Facility, and the existing cash balances, will be sufficient to meet its working capital requirements for at least the next twelve months.

20




Item 3.                       Quantitative and Qualitative Disclosures About Market Risk.

The Company’s fixed rate debt is not exposed to cash flow or interest rate changes but it is exposed to fair market value changes in the event of refinancing this fixed rate debt.

The Company has approximately $7,000 of variable rate borrowings outstanding under an equipment loan.  A hypothetical 10% adverse change in interest rates for this variable rate debt would have no material effect on the Company’s earnings and cash flows on a quarterly basis.

Item 4.                       Controls and Procedures

The Company’s management, including the President and Chief Operating Officer and Controller, conducted an evaluation of the Company’s disclosure controls and procedures as of June 30, 2007.  Based on this evaluation, the President and Controller have determined that such controls and procedures are effective to ensure that information relating to the Company, including its consolidated subsidiaries, required to be disclosed in reports that it files or submits under the Securities Exchange Act of 1934 is recorded, processed, summarized and reported within the time periods specified in the rules and forms of the Securities and Exchange Commission.  There have been no changes in the Company’s internal controls over financial reporting that were identified during the evaluation that occurred during the Company’s second fiscal quarter of 2007 that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

21




PART II.    OTHER INFORMATION

Item 1.                       Legal Proceedings

The Company is not a party to any material legal proceedings.

Item 1A.              Risk Factors

You should carefully consider the risks and uncertainties described below and the other information in this filing before deciding to purchase our common stock.  If any of these risks or uncertainties occurs, our business, financial condition or operating results could be materially harmed.  In that case the trading price of our common stock could decline and you could lose all or part of your investment.  The risks and uncertainties described below are not the only ones we may face.  We believe that this filing contains forward-looking statements as that term is defined in the Private Securities Litigation Reform Act of 1995.  Such forward-looking statements are subject to regulatory risks and clinical uncertainties.  Such statements are based on management’s current expectations and are subject to facts that could cause results to differ materially from the forward-looking statements.  For further information you are encouraged to review MFIC Corporation’s filings with the Securities and Exchange Commission, including its Annual Report on Form 10-K for the period ended December 31, 2006.  The Company assumes no continuing obligation to update the information contained in this filing.

We face intense competition in many of our markets.

Our Microfluidizer product line of high-shear fluid processors has direct competition in its major markets, including its most important markets in the pharmaceutical, biotechnology and coatings/chemical industries.

In addition, the Company faces, and will continue to face, intense competition from other companies who manufacture and sell fluid processing systems used in particle size reduction, mixing, milling, dispersing, homogenizing, cell disruption and liposomal encapsulation applications. The Company expects competition to intensify in the fluid processing systems field as technical advances are made and become more widely known, and such increased competition may have a material adverse effect upon our business.

We are subject to significant competition from companies that are pursuing technologies and products that are similar to our technology and products.

Our future success will depend in large part on the Company’s ability to maintain a technologically superior product line.  Rapid technological development by the Company or others may result in our products or technologies becoming obsolete before the Company recovers the expenses the Company incurs in connection with their development.  Products offered by the Company could be made obsolete by less expensive or more effective technologies.  There can be no assurance that the Company will be able to make the enhancements to our technology necessary to compete successfully with newly emerging technologies.

We rely on suppliers, vendors and subcontractors.

The Company does not manufacture most of the components contained in its Microfluidizer materials processor equipment but rather subcontracts the manufacture of most components.  Based on quality, price, and performance, the Company has selected certain suppliers, vendors, and subcontractors that provide parts, subassemblies, machining and finishing of components that are assembled by the Company’s production staff.  Although the Company has identified alternate sources for such parts, components, machining and finishing, there can be no assurance that a transition to such alternative sources would not entail quality assurance and quality control difficulties, on-time delivery problems, or other transitional problems, any or all of which could have an impact on the Company’s production of equipment and could have a material adverse effect on the Company’s business, financial condition, or results of operations.

Our customer base is concentrated, and a substantial portion of our sales are provided by just three customers.

Three customers accounted for an aggregate of 16.0% of the Company’s revenues for the six months ended June 30, 2007.  Historically, our largest single customer has been the Japanese distributor of our Microfluidizer processor equipment and spare parts, which accounted for 5.4% of our revenues for the six months ended June 30, 2007 and 15.3% of our revenues for the six months ended June 30, 2006.  Our next historically largest customer accounted for 8.4% of our revenues for the six months ended June 30, 2007, and 13.4% of our revenues for the six months ended June 30, 2006.  A third customer is a distributor in Canada who accounted for 2.2% of our revenues for the six months ended June 30, 2007 and 8.8% of our revenues for the six months ended June 30, 2006.

22




During the quarter ended June 30, 2007, a customer (the “Customer”) that uses our equipment to provide outsourced processing of products for pharmaceutical companies notified us of the discontinuation of certain services for one of its pharmaceutical customers.  As a result, there was a reduction in spare parts purchases from the Customer of approximately $430,000 for the quarter ended June 30, 2007.  Although we are unaware of any plans by any other customers to reduce their business with us, the loss of any one or more of these customers, or the loss of business by customers using our equipment to provide outsourced processing services for their customers, would be highly problematic for us, and would likely cause a material change in our near-term, and possibly long-term, financial prospects.  In addition, a reduction or delay in orders from any of these customers could have a material adverse effect on the Company’s results of operations.

As of June 30, 2007, 12.7% and 8.3% of the Company’s trade accounts receivable were due from two customers, respectively, both of which are long-established customers of the Company and neither of which have presented credit issues in the past.  Nevertheless, if either or both of these customers were to default on their obligations to us such default would likely cause a material change in our near-term, and possibly long-term, financial prospects.

Many of our current and potential customers are from the pharmaceutical and biotechnology industries and are subject to risks faced by those industries.

We derive a substantial portion of our revenues from pharmaceutical and biotechnology companies.  We expect that pharmaceutical and biotechnology companies will continue to be two of our major sources of revenues for the foreseeable future.  As a result, we are subject to risks and uncertainties that affect the pharmaceutical and biotechnology industries, such as the failure of newly developed drug products to meet regulatory requirements, pricing pressures as third-party payers continue challenging the pricing of medical products and services,  ongoing consolidation and uncertainty of technological change, and to reductions and delays in research and development expenditures by companies in these industries.

 Many biotechnology and pharmaceutical companies have significant patents that have expired or are about to expire, which could result in reduced revenues for those companies.  If pharmaceutical companies suffer reduced revenues as a result of these patent expirations, they may be unable to purchase our products, and our business and results of operations could be materially adversely affected.

In addition, we are dependent, both directly and indirectly, upon general health care spending patterns, particularly in the research and development budgets of the pharmaceutical and biotechnology industries, as well as upon the financial condition and purchasing patterns of various governments and government agencies.  Many of our customers, including universities, government research laboratories, private foundations and other institutions, obtain funding for the purchase of products from grants by governments or government agencies.  There exists the risk of potential decrease in the level of governmental spending allocated to scientific and medical research, which could substantially reduce or even eliminate these grants.  If government funding necessary to purchase our products were to decrease, our business and results of operations could be materially adversely affected.

We have only one manufacturing facility.

The Company has only one manufacturing facility located in Newton, Massachusetts. Our success depends on the efficient and uninterrupted operation of that facility. Whether as a result of a fire, natural disaster, or other cause, any disruption to our manufacturing operations would significantly impair our ability to operate our business on a day-to-day basis. Although the Company maintains business interruption insurance, our business would be injured by any extended interruption of the operations of our manufacturing facility. Further, although the Company carries property and business interruption insurance, our coverage may not be adequate to compensate us for all losses that may occur. This insurance may not continue to be available to the Company. Finally, if the Company seeks to replicate our manufacturing operations at another location, the Company will face a number of technical as well as financial challenges, which the Company may not be able to address successfully.

We rely on our trade secrets to protect our technology.

The Company’s Microfluidizer processor equipment method patent expired on March 13, 2007 and its device patent expired on August 6, 2002.  In addition, the Company has neither sought patent protection for its Microfluidizer interaction chamber nor trademark protection of its Microfluidizer trade name in any country other than the United States.  As such, its proprietary rights are not subject to the protection of patent or trademark laws of foreign countries where the Company’s equipment is sold.  Although the Company has made many alterations, improvements and advances to its equipment over the years and continues to make such advancements with such modification and innovations having been and being treated by the Company as trade secrets, the lack or limited

23




nature of our patent protections will expose the Company to potential competition that would likely have a material adverse effect on the Company.

In order to afford additional protection to its intellectual property, in November 2006 the Company adopted a provision as part of its standard terms and conditions of purchase.  Such provision is an acknowledgement and agreement by a purchaser of the Company’s merchandise and equipment (the “Equipment”) that certain proprietary intellectual property of the Company, including the design, operation and use of the Equipment’s interaction chamber or reaction chamber constitutes the Company’s trade secret information (the “Trade Secret Information”).  Such purchaser agrees that it will not (and will not aid, assist or permit any other person to): (i) tamper with the Equipment, (ii) utilize imaging equipment or other means to reveal the inner structures and/or designs of the Equipment, (iii) attempt to disassemble or reverse engineer the Equipment, including specifically the interaction or reaction chamber, or (iv) otherwise attempt to discover and/or utilize any of the Trade Secret Information.  A purchaser is further prohibited from disclosing (or aiding, assisting or permitting third parties to disclose) any information which the purchaser may learn or discover about the materials and methods of construction, design, assembly, functioning, geometries, measurements and tolerances of the internal components of the Equipment.  In the event of a violation of any of the above prohibitions, the purchaser has stipulated that it is liable to the Company and/or its subsidiary, Microfluidics Corporation, for any and all actual and potential, direct and indirect, incidental and consequential damages, including, without limitation, resulting lost profits, and all available equitable relief.  The Company has made such provision applicable to purchasers, renters and subsidized users of the Equipment (“Users”).  Despite the protection afforded by such provision, there can be no assurance that the Company will be able to monitor compliance by all Users or that if the Company becomes aware of a violation that it will be able to enforce its rights regarding such violation.

To protect its other proprietary rights, the Company relies on a combination of trademark laws, trade secrets, confidentiality agreements, contractual provisions and technical means.  In the event of a breach of these protections, there can be no assurance that these measures will prove to have been adequate to protect the Company’s interests, or that the Company will have sufficient resources to prosecute or prevail in an action against a third party.  The Company maintains confidentiality and non-competition agreements with those parties to whom it discloses non-public technical information relating to its equipment.  The Company believes that enforcement of the provisions of such agreements should adequately protect the Company’s proprietary information.  However, in the event of a material breach of such agreements, certain of the Company’s valuable intellectual property may be disclosed to third parties (including competitors).  In such event, despite provisions for equitable relief and damages in the event of such breaches, the Company may suffer competitively and be materially and negatively impacted as a result of such unauthorized disclosure.

We must continue our research and development efforts to maintain our competitiveness.

The Company’s research and development efforts are focused on: (i) developing new processing applications for the process industries and further enhancing the functionality, reliability and performance of existing products, and development of new equipment models, and (ii) development of the Microfluidics Reaction Technology(MRT) and Multiple-Stream High Pressure Mixer/Reactor (MMR) by: (a) working with customers who assist in the development of the system with both application knowledge and financial support, and (b) internal development program relating to interaction chamber design and creation of a variety nanomaterials. There can be no assurance that the Company will be able to meet the enhancement challenges posed by applications of its core Microfluidizer processor business.  Likewise there can be no assurance that the Company will be able to design and manufacture systems for its MMR applications that will deliver the desired result for specific applications.  The inability to meet the enhancement challenges or design and manufacture systems for its MMR applications may have a material adverse effect on the Company.

Our ability to continue planned operations is dependent upon access to financing under a credit facility with our commercial lender.

The Company’s credit facility is comprised of a revolving line of credit in the maximum principal amount of $1,000,000 and a term loan note in a face amount of $1,000,000 under which the Company currently owed approximately $188,000 at June 30, 2007.  Under the terms of the credit facility, the Company is subject to a number of restrictions that impact the Company’s use of funds.  The Company is limited in ability to acquire property and pay dividends, and it must maintain certain financial covenants as defined.  The Company’s ability to operate is potentially impacted by the Company’s ability to achieve future compliance with the financial covenants of the credit facility.  The obligations due the lender are essentially demand obligations and under certain circumstances, including the lender’s determination that the Company’s prospect of payment of all or any part of the

24




obligations due the lender are impaired, the lender may declare a default and accelerate payment of the obligations.  Loans under the credit facility are secured by a collateral pledge to the lender of substantially all the assets of the Company and its subsidiary.  In the event of a breach of the covenants or events of default under the credit facility there can be no assurance that the Company can obtain a waiver of such breach or default from its lender.  Likewise, in the event of that the Company cannot effect a cure or obtain a waiver of a breach or default under the credit facility there can be no assurance either that the lender will not terminate the credit facility or that the Company will be able to obtain alternate financing, or that it can obtain alternate financing on terms that are favorable to the Company.  Either event could have a material adverse effect on the Company’s business, financial condition, or results of operations.

Pursuant to its agreements with the lender, the Company may not issue, create or incur additional debt in excess of its obligations to lender, except in the ordinary course of business.

There can be no assurance that the Company will have access to sufficient working capital through continued and improving cash flow from sales and ongoing borrowing availability, the latter being subject to the Company’s ability to comply with the covenants and terms of the Company’s loan agreement with its lender.

We may be subjected to increased government regulation which could affect our ability to sell our products outside of the United States.

Although the Company has not historically been significantly affected by any United States governmental restrictions on technology transfer, import, export and customs regulations and other present local, state or federal regulation, any future legislation or administrative action restricting our ability to sell our products to certain countries outside the United States could significantly affect our ability to make certain foreign sales.  The extent of adverse governmental regulation, which might result from future legislation or administrative action, cannot be accurately predicted.  In particular, the USA Patriot Act and other governmental regulations may impose export restrictions on sale of equipment or transfer of technology to certain countries or groups.  There can be no assurance that sale of the Company’s equipment will not be impacted by any such legislation or designation. Depending upon which countries and sales may be designated for trade restriction such action could have a material adverse effect on the Company’s business, financial condition, or results of operations.  Also, certain agreements that may be entered into by the Company involving exclusive license rights may also be subject to national or supranational antitrust regulatory control, the effect of which cannot be predicted.

We rely on our key management and technical personnel.

The Company’s continued operation, innovation and growth are to some significant degree reliant on the continued services of its key executive officers and leading technical personnel.  While the Company entered into employment contracts with its executive officers on April 26, 2007, the Company does not maintain employment contracts with its other members of key management or with its leading technical personnel.  There can be no assurance that the Company will be able to retain such key management and technical personnel if employment is offered by other companies better able to pay higher compensation, provide more and better benefits, or willing to offer longer term job security by entering into employment contracts with the Company’s employees, whether or not they currently have employment agreements with the Company.  Further, there can be no assurance that key executive officers and leading technical personnel will not leave the Company’s employment, or either die or become disabled to an extent that they cannot render their services to the Company.  On April 6, 2007, Mr. Irwin Gruverman resigned as the Company’s Chief Executive Officer.  Following Mr. Gruverman’s resignation, the Company commenced a search to fill this vacated position.  Though the Company believes that it can identify and recruit replacement key management and technical personnel, there can be no assurance as to such availability, the length of time required to obtain such replacement management, including a new Chief Executive Officer, and technical personnel, the salary level that may have to be paid to obtain their respective services, or the impact on operations that may be experienced through the interim absence of such key management and technical personnel.  The loss of key management or leading technical personnel could, therefore, have a material adverse effect on the Company’s business, financial condition, or results of operations.

Our stock is listed on the OTC Bulletin Board and our stockholders may have limited liquidity.

The Company’s common stock is quoted on the OTC Bulletin Board, which provides significantly less liquidity than a securities exchange (such as the American or New York Stock Exchanges or The Nasdaq Stock Market LLC).  In general, over the past two years, fewer than 100,000 shares of our common stock have traded on a daily basis.  Management expects, when and if the Company qualifies, to seek a listing on a national securities exchange, which

25




may increase stockholders liquidity.  There is uncertainty that the Company will ever be accepted for a listing on a securities exchange.

Our quarterly revenues and stock performance are variable.

The timing of orders and subsequent shipment will significantly affect quarterly revenues and resulting net income results for particular quarters which may cause increased volatility in both the Company’s revenues and stock price.

We allow our customers to lease some of our products and those leases may not turn into sales.

We sometimes lease our products to our customers prior to or instead of selling a product to a customer.  The Company’s products are expensive, and customers frequently want to test out a product’s capabilities prior to purchase.  We have had reasonable success in converting leases into subsequent sales of the same or a newer product, however there is no guarantee that we will continue to be able to convert any of our leases into sales.

We may be subject to product liability claims from our customers or by persons harmed by our customers’ products.

The Company maintains what it deems to be reasonable levels of product liability coverage through insurance policies with a reasonably small deductible. Nonetheless, inasmuch as the Company sells its equipment to a number of customers who make products such as pharmaceutical preparations, food additives, and consumer cosmetics, there can be no assurance that if a consumer of end products is injured or dies from such product that a suit by an injured party (or a class of similar situated plaintiffs) will not sue the Company as well as the maker of the drug, food additive, or cosmetic. Although the Company may have no control over the manufacture of end-products made on its equipments, it may not be able to bar a plaintiff’s claims against all parties whose products and equipment were in involved in the manufacturing process under a variety of legal theories of liability. The Company may be required to present a vigorous and costly defense if it cannot be dismissed from such an action. The cost of such legal defense may significantly impact the cash flow of the Company.

Our international business operations expose us to a variety of risks.

Shipments outside of North America accounted for approximately 44.6% and 45.6% of our net revenues for the three months ended June 30, 2007 and 2006, respectively; and 42.2% and 48.8% of our net revenues for the six months ended June 30, 2007 and 2006, respectively.  Of the shipments outside of North America, 4.1% and 13.7% of our net revenues resulted from sales to Japan in the three months ended June 30, 2007 and 2006, respectively; 5.4% and 15.3% of our net revenues resulted from sales to Japan in the six months ended June 30, 2007 and 2006, respectively.  Sales to Korea accounted for 6.5% and 6.5% of our net revenues in the three months ended June 30, 2007 and 2006, respectively; and 5.5% and 8.0% of our net revenues in the six months ended June 30, 2007 and 2006, respectively.  Sales to Europe accounted for 28.0% and 22.6% of our net revenues in the three months ended June 30, 2007 and 2006, respectively; and 26.1% and 20.9% of our net revenues in the six months ended June 30, 2007 and 2006, respectively.  We expect that shipments outside of North America will continue to account for a significant portion of our total net product revenues.

We attempt to reduce some of our risk related to sales and shipments outside of the United States by requiring that our contracts generally be paid in United States Dollars.  Nevertheless, a downturn in the economies of Japan, Korea or Europe might reduce investment in new technology or products while a weakening of foreign currency against the United States Dollar would make our products more expensive, each of which could have a substantial impact on our operating results.

In addition, a significant portion of our total net revenue is subject to the risks associated with shipping to foreign markets in general, including unexpected changes in legal and regulatory requirements; changes in tariffs; political and economic instability; risk of terrorism; difficulties in managing distributors and representatives; difficulties in protecting our intellectual property overseas; and natural disasters, any of which could have a negative impact on our operating results.

Compliance with internal controls reporting requirements will increase our costs.

As directed by Section 404 of the Sarbanes-Oxley Act of 2002, the Securities and Exchange Commission adopted rules requiring public companies to include a report of management on a company’s internal control over financial reporting in their annual reports on Form 10-K.  This report is required to contain an assessment by management of the effectiveness of such company’s internal controls over financial reporting.  In addition, the public accounting firm auditing a public company’s financial statements must attest to and report on management’s

26




assessment of the effectiveness of a company’s internal controls over financial reporting.  We intend to expend resources in developing the necessary documentation and testing procedures required by Section 404.  Going forward, there is a risk that we will not comply with all of the requirements imposed by Section 404.  If the Company fails to implement required new or improved controls, we may be unable to comply with the requirements of Section 404 in a timely manner.  This could result in an adverse reaction in the financial markets due to a loss of confidence in the reliability of the Company’s financial statements, which could cause the market price of the Company’s common stock to decline and make it more difficult for the Company to finance its operations.  Under current rules, the Company is required to comply with certain requirements of Section 404 by its first fiscal year ending on or after December 15, 2007.

Future changes in financial accounting standards may adversely affect our reported results of operations.

A change in accounting standards can have a significant effect on our reported financial results.  New accounting pronouncements and varying interpretations of accounting pronouncements have occurred and may occur in the future.  These new accounting pronouncements may adversely affect our reported financial results.

If our accounting estimates are not correct, our financial results could be adversely affected.

Management judgment and estimates are necessarily required in the application of our Critical Accounting Policies.  We discuss these estimates in the subsection entitled Critical Accounting Policies beginning on page 14.  If our estimates are incorrect, our future financial operating results and financial condition could be adversely affected.

Item 2.                       Unregistered Sales of Equity Securities and Use of Proceeds

 None.

Item 3.                       Defaults Upon Senior Securities

 None.

Item 4.                       Submission of Matters to a Vote of Security Holders

On June 21, 2007, the Company held the 2007 Annual Meeting of Stockholders at which stockholders of record as of April 26, 2007 were entitled to vote on the following matters:

(1)          To elect five (5) directors to hold office until their successors shall be elected and shall have qualified; and

(2)          To ratify the selection of UHY LLP as the Company’s independent accountants for the fiscal year ending December 31, 2007.

As of April 26, 2007, the record date, there were 10,173,746 shares eligible to vote.  As of June 21, 2007, votes representing 9,009,917 shares were cast.  A majority of the stockholders voted in favor of and a motion was made approving the nomination of the directors and ratification of the independent accountants.  The results of the votes are as follows:

Proposal No. 1 - Election of Directors:

 

For

 

Withheld

 

Irwin J. Gruverman

 

8,688,482

 

321,435

 

James N. Little

 

8,346,037

 

663,880

 

Leo Pierre Roy

 

8,328,037

 

681,880

 

George Uveges

 

8,387,437

 

622,480

 

Eric G. Walters

 

8,388,437

 

621,480

 

 

Proposal No. 2 - Ratification of Independent Accountants:

 

For

 

Against

 

Abstain

 

UHY LLP to serve as independent accountants for the fiscal year ended December 31, 2007

 

8,959,027

 

25,308

 

25,582

 

 

Item 5.                       Other Information

 None.

27




Item 6.                       Exhibits

 

Exhibits

 

 

 

 

 

 

31.1

 

Certification of Principal Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

 

 

 

 

 

 

 

31.2

 

Certification of Principal Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

 

 

 

 

 

 

 

32.1

 

Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

 

 

 

 

 

 

 

32.2

 

Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

 

 

28




SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

MFIC CORPORATION

 

 

 

By:

/s/ Robert P. Bruno

 

 

 

Robert P. Bruno

 

 

President and Chief Operating Officer

 

 

 

By:

/s/ Dennis P. Riordan

 

 

 

Dennis P. Riordan

 

 

Controller

 

 

 

 

 

 

Dated:  August 13, 2007

 

 

29